The reasons for gold mining performance up to 4 cubes per hour
Offer type: salePublished: 17.08.2013
| Seller: |  A Denis |
| Phones: |  +7 903-900-0686 Show phone |
| Address: | Russian Federation, Novosibirskaya Oblast', Novosibirsk |
Mobile processing complex "IOC-GOLD-4-M" is fully ready to operate the unit, and having the capacity from 1, 5 to 4 m3/ h particulate matter, this is an ideal machine for small gold mining.
The breed is loaded into the hopper. The hopper has an adjustable valve supply water to slurry the material before it contacts the drum screen. Since falling rocks in the drum she is breaking the lifters. The entire length of the drum screen acts irrigation device with its own adjustable valve in the water supply. Then the material of the faction "-10" mm passes through the holes in the drum and enters the processing gateway. The material of the faction "+10"mm is passed on by the end of the drum, which includes a trap for large nuggets +10 to-55mm lens. Small nuggets-10mm remain in the gateway on the mats and held the stencil, while the lighter material is washed out.
The gateway has a quick stencil that allows you to quickly capture concentrate.
At the end of the day (or sooner, if necessary) turn off the engine. At the rear of the unit (from the side of the hopper) manually remove the gateway from the nest pendants hopper. Loosen the four lever and remove the stencil gateway to remove mats from concentrate, which will need to be washed in water containers. Then repeat the operation in reverse order and you're ready for a new cycle of works.
The simplicity of the IOC makes it the leader in the number of portable equipment for work on the Goldfields. Built on an industrial basis, the IOC easy maintenance and operation. The internal combustion engine is mounted on the mounting frame, which is easily removable by removing the cotter pin. This is done to prevent theft, as you can pick up the motor on the night of a home. The same motor drives the gearbox and the water pump, using the V-belt drive. The trommel is a positive chain drive.
The breed is loaded into the hopper. The hopper has an adjustable valve supply water to slurry the material before it contacts the drum screen. Since falling rocks in the drum she is breaking the lifters. The entire length of the drum screen acts irrigation device with its own adjustable valve in the water supply. Then the material of the faction "-10" mm passes through the holes in the drum and enters the processing gateway. The material of the faction "+10"mm is passed on by the end of the drum, which includes a trap for large nuggets +10 to-55mm lens. Small nuggets-10mm remain in the gateway on the mats and held the stencil, while the lighter material is washed out.
The gateway has a quick stencil that allows you to quickly capture concentrate.
At the end of the day (or sooner, if necessary) turn off the engine. At the rear of the unit (from the side of the hopper) manually remove the gateway from the nest pendants hopper. Loosen the four lever and remove the stencil gateway to remove mats from concentrate, which will need to be washed in water containers. Then repeat the operation in reverse order and you're ready for a new cycle of works.
The simplicity of the IOC makes it the leader in the number of portable equipment for work on the Goldfields. Built on an industrial basis, the IOC easy maintenance and operation. The internal combustion engine is mounted on the mounting frame, which is easily removable by removing the cotter pin. This is done to prevent theft, as you can pick up the motor on the night of a home. The same motor drives the gearbox and the water pump, using the V-belt drive. The trommel is a positive chain drive.
