The SKC pump 4.08 motor 3 kW on the frame for gas, glycol...
Offer type: salePublished: 27.02.2015
| Price: | 1 985 EUR |
| Company: | TOV 'Gidro-Vakuum Ukrayina” |
| Seller: |  GidroVakuum Anton Nikolaevich |
| Phones: |  067 401 65 92 Show phone |
| Address: | Kyiv, Ukraine |
The representative of the manufacturer of pumping equipment Hydro-Vacuum in Ukraine, offers You the SKC pump 4.08 motor 3 kW metal frame.
Characteristics of the pump:
Q= 1,9m3 H= 210m
Q= 2,2m3 H= 182m
Q= 2,8m3 H= 152m
Q= 3,8m3 H= 94m
Q= 4,5m3 H= 60m
Application
Centrifugal circulation pumps with bypass channel and the centrifugal rotor before the first stage are used for pumping liquids within the corrosion resistance of materials used in their construction, containing non-abrasive solid particles up to 0.5 mm in small quantities. The SKC pump is designed to work with flow or normal suction pump, after the pre-install check valve on the suction pipe and of course the necessary fill fluid pump and suction system.
The SKC pumps can pump liquids with a minimum excess pressure above the boiling point. Small anticavitation stock NPSHr and very high suction ability is a special advantage of these pumps. They are designed for pumping petroleum fuels and mixtures of propane to butane, without a share of the gas phase.
Design
Pumps SKC on the suction side have an axial entrance to the increased diameter, and on the discharge side of the output, displayed vertically. Before the first stage with the suction side of the applied centrifugal rotor and the guide apparatus. Speed pump are typical speed circulation pump with bypass channels and open rotors. In pumps with the discharge side mounted ball bearing and the corresponding shaft seal. Depending on the destination and the kind of structural design of the pump is applied, in particular, mechanical seal, ensuring complete sealing.
Quality:
guaranteed many years of reliable operation and easy access to spare parts,
the fulfillment of individual requirements and bringing the products in accordance with customer needs,
constant technical supervision and warranty and post-warranty service,
the low-cost of purchase and operation,
high survivability in demanding operating conditions,
high resistance to variable climatic conditions, including working in extreme temperature environments
joint work with ground tanks.
