Belonging to the indicator WHEN-1M "CHEESE"
Offer type: salePublished: 28.02.2015
| Seller: |  Byihovets Ol'ga Vladimirovna |
| Phones: |  0667371320 Show phone |
| Address: | Ukraine, Chernihivs'ka Oblast', Chernihiv |
The kit is designed to check the runout of inner and outer surfaces, for inspection of parts during processing and calibration machines, in mounting and assembling works.
For installation on a flat surface used hours and hours combined, and the shaft - clamp.
The horizontal rod is equipped with micropolicy for fine adjustment of the indicator. The rectangular holder with rod may be secured in the holder of the machine.
The kit includes:
clamp with soft lining
the horizontal rod with micropolicy
the rectangular holder with rod
hour combined
the indicator lever-gear type of the RBI
case
Specifications
The diameter of the clamp in the clamp shaft - 30-70 mm
The diameter of the shaft, check in the prism combination rack - 10-70 mm
The stand height, not less than 150 mm
Intercept indicator of 0.01 mm.
Dimensions of case - HH mm.
Weight set - 6,1 kg
Sets IF-1M manufactured by THE 20/344/68.
Manufacturer: JSC "Chelyabinsk tool plant"
For installation on a flat surface used hours and hours combined, and the shaft - clamp.
The horizontal rod is equipped with micropolicy for fine adjustment of the indicator. The rectangular holder with rod may be secured in the holder of the machine.
The kit includes:
clamp with soft lining
the horizontal rod with micropolicy
the rectangular holder with rod
hour combined
the indicator lever-gear type of the RBI
case
Specifications
The diameter of the clamp in the clamp shaft - 30-70 mm
The diameter of the shaft, check in the prism combination rack - 10-70 mm
The stand height, not less than 150 mm
Intercept indicator of 0.01 mm.
Dimensions of case - HH mm.
Weight set - 6,1 kg
Sets IF-1M manufactured by THE 20/344/68.
Manufacturer: JSC "Chelyabinsk tool plant"
