Press the punches for punching holes
Offer type: salePublished: 22.08.2014
| Seller: |  Sharapov Aleksej |
| Phones: |  (8452)760-850 Show phone760-860 Show phone |
| Address: | Russian Federation, Saratovskaya Oblast', Saratov |
•Press-hydraulic punch is designed to punch holes with a maximum accuracy of the location of various structures during construction, bridge construction, installation and other works
•Significantly reduce the time of receiving holes in comparison with drilling
•The handle is a button to control the 4-line 2-position valve of the pumping station with electromagnetic control for changing the direction of feed of hydraulic fluid in the working cavity of the press punch
•Removing the material from the punch after the perforation holes is produced by pumping hydraulic fluid into the rod cavity press the punch returns to its original position, the sheet is removed, resting on a stripper
•The thickness of the sheet 10, 16, 20 mm, respectively (see the last 2 digits in the model)
•The kit includes a hammer drill, a set of dies and punches according to the range of punched holes
•Significantly reduce the time of receiving holes in comparison with drilling
•The handle is a button to control the 4-line 2-position valve of the pumping station with electromagnetic control for changing the direction of feed of hydraulic fluid in the working cavity of the press punch
•Removing the material from the punch after the perforation holes is produced by pumping hydraulic fluid into the rod cavity press the punch returns to its original position, the sheet is removed, resting on a stripper
•The thickness of the sheet 10, 16, 20 mm, respectively (see the last 2 digits in the model)
•The kit includes a hammer drill, a set of dies and punches according to the range of punched holes
