Line for the production of plates Armolit

Production line mineral cement panels reinforced with fiberglass mesh. ( M ineral cement board).

Facade mineral-cement panels consist of cement, mineral fillers: sand, perlite and reinforced both sides with fiberglass mesh for high strength exterior surfaces.
Environmentally friendly composite wall material used for wall cladding of facades, interiors, floors, ceiling, partitions.

Production line for mineral-cement panels comprises:
1. Line conveyor ― 1 PC.
2. Kassetten – 1 PC.
3. Cassette 30 form – 7 PCs.
4. Form ― plastic ABS dimensions 3.2 x 1300 x 2520 mm ― 215 PCs.
5. Mixer 1 PCs.
6. The hopper with drive – double ― 1 PC.
7. The hopper wheel – single-1 piece
8. Screws ― 2 PCs.
9. Line cutters ― 1 PC.
10. The plastic capacity of 2.5 cubic meters c pump-1 PCs.

Characteristics:
The line capacity for panels size
12 mm x 0.9 x 2.4 m ― 210 PCs / shift;
Manufacturing site for Assembly line total area -500 sq. m. min;
For maintenance of the conveyor line, shop the room should be equipped with a crane with a capacity of 5-10 tons, with a remote control unit and a lifting height of 7 m.;
Power supply ― three phase 24 kW, 8 kW/phase.;
Water consumption -4 cubic meters per shift
The consumption of cement is 3.5 tons/shift;
The flow of sand is 3.5 tons/shift;
The consumption of perlite to 3 cubic meters per shift;
The consumption of fiberglass -1060 sq. m. /shift;
Plasticizers cement -30 kg. /shift;
Number of employees ― 6 /shift;

The equipment is located on the territory of Ukraine in Dnepropetrovsk.
It may be sold as a configured business has a registered trademark.
The line was in operation for 1 year.
Delivery in any point of Ukraine! Assembly. Installation.
Shipping outside of Ukraine according to the additional agreement.
Bargain.
Will provide all necessary information ― Call us!

Video (production line):
https: //youtu. be/qqGH_dj39q4