Sell double arbor multirip machine TT-200/240M

Double arbor multirip machine TT-200/240M Is used for cutting boards and strips of timber, which has three of Kant. The thickness of boards and planks depends on the bushings, which are located between disk saws. The machine can be used on small, medium and the large wood-processing enterprises. With the aim of obtaining great height of cut (180 mm) in the machine incorporates two shaft for saws that are placed one above the other and offset relative to yourself perpendicular to their axis. Both shafts for saws mounted on the calipers which make possible the positioning of the shafts in a vertical plane. This allows the use of dust with different diameters (200: 300 mm) depending on thickness of the cut material. The feed mechanism is with three fixed and two lower rolls, the upper movable at all the shaft has a chain transmission from the gear reducer. Multirip saw TT-200/240M can be used for cutting material unlimited width. - diameter circular saws: 200 - 300 mm (320 mm); - maximum thickness of material: 180 mm ( 200 mm); - minimum material thickness: 20 mm; - maximum material width 400 mm; - the maximum number of circular saws: a) lower the spindle 10 PCs.; (b) the upper spindle 10 PCs.; - spindle diameter 50 mm (60 mm); - diameter of the bushing saw blade 70 mm (80 mm); - power of engines: (a) the upper spindle 11 to 30 kV; b) lower the spindle 11 to 30 kV; - speed engine: 2900 rpm./min.; - shaft rotation flow 3800 rpm.min.; - engine power drive supply: 1.1 kV (1.5 kV); - the engine speed of the feed drive: 1450 rpm./min.; - the range of feed speed: 0 - 15 m/min.; - power supply: 3 x 400V, 50 Hz; - performance: 5 m3/h; - diameter of exhaust tubes: 2 x 150 mm; - the noise is below: 95 [dB]; - dimensions (L x W x h): 1400 x 1150 x 1540 mm; - machine weight: 1650 kg. A WIDE RANGE OF WOODWORKING MACHINERY the world's leading manufacturers of EUROPE and ASIA both new and used MAINTENANCE and REPAIR of industrial equipment LLC "TOTAN-GROUP"