Sawmill band mobile TT-600R-Mobile

Sawmill band mobile TT-600R-Mobile

This machine is designed for processing logs. The use of hydraulic drive significantly improves the performance of the machine and simplifies manipulation of the log. The performance of the unit depends on the thickness raskraivaemyj logs and the necessary timber dimensions and is, on average, 1-2 m3/h. Band saw Assembly is widely used in the sawmill industry, household, woodworking and furniture industry due to significant raw material savings, as well as high precision cutting at 0.5-1 mm. Innovativeness band unit TTP-600 is performed at the leading pulley of the track, which fits tightly mnogokanalnyy belt, preventing the ingress of resin, sawdust between the track and the belt and breaking the belt. This solution provides a stable, smooth and low noise operation of the saw, to avoid vibration, improves accuracy of cut and extends the life of the saw blade by 40%. Unit TT-600P-Mobile also made in fixed modification.

SPECIFICATIONS (base model)

weight - 1850 kg model with the hydraulics (PREMIUM 2150 kg)
power of main motor 7.5 KW/(PREMIUM 11-15) KW
power of 10.0 KW (when fully loaded + hydraulics 4 KW)
power supply – 380 V, 50 Hz
vertical supply – electric drive
longitudinal feed of the cutting head is smooth (inverter) 0-40 m/min.
supply and exhaust roller electric drive – motor-reducer
the clearance of the cutting head horizontal – 750 mm (PREMIUM 900 mm)
the clearance of the cutting head vertical – 280 mm (PREMIUM 340 mm)
the width of the saw blade is 32-35 mm
length of blade - 4004 mm (PREMIUM 4800 mm)
cutting width and 1.5 - 2.5
inpatient management console
the diameter of the leading pulleys – 475 mm (PREMIUM 600 mm)
the support frame Assembly is made from box section 200 x 120 x 6 mm
inertial brake company ALCO
axle braking of the company ALCO x 1 PC.
lighting and reflective elements in accordance with the standards prepared for the registration, supports adjustable angular load of 600 kg each 8 PCs.

ADDITIONAL EQUIPMENT

full hydraulics/clamp x 1, angled supports x 4, loader log x 1 alignment level with the feed drive logs front-to-back x 1, the tilter logs x 1
second axis braking is recommended when complete hydraulics ALCO
the sensor measurement of lumber ISP-010
main motor 11 KW automatic node debarking
auxiliary hydraulics
increasing the length of the support frame to an arbitrary length
the operator's seat
water supply solenoid valve

DIMENSIONS (base model)

length 7000 mm
width - 2000 mm(outside dimension along the axis)
height - 1900 mm

TECHNICAL DATA of the PROCESSED BEAMS (basic model)

the beam diameter - 850 mm
the weight of the treated beams in 5-ton
the standard length of the cut - 5800 mm