Sell gathernow pallet sawmill TT-570PRP

TT-570PRP represents a universal saws designed for cutting logs or prisms length 7000 mm max. and a diameter of 350 mm.

The use of 8 rolls, four on each side, allows you to cut the short stacks of the prism between 800 mm and logs from 1200 mm Vertical sawmill TT-570PRP, in addition to standard functions sawmills, allows you to perform functions brussela machine. When you do this to him advantages include extremely economical cutting width, component 2,2 or 2.8 mm, and when using the bench as a multi-trip machine, when stacked stacking prisms may receive in a single pass from 10 to 30, for example, boards of a width of 19 mm, with a total electricity consumption of 18 kW. The performance of the sawmill is, on average, from 15 to 25 m3 per shift (8 h).

SPECIFICATIONS:

Horizontal clearance sawmills - 570 mm
The vertical clearance between the rollers - 350 mm
Step sawmills - 300 mm
The speed of revolutions of the main shaft at 300 rpm.min.
Feed rate is 0.5-2.5 m/min
The dimensions of the blade of the knife length x width x thickness - 815x80x1,5 mm
The maximum number of saws - 10 PCs.
Main engine - 15,0 kW/950 rpm.min.
Feed motor - 0,75 kW/1450 rpm./min.
Engine hydraulic pump 2.2 kW/1450 rpm./min.
Power consumption: 18 kW
The minimum thickness is sucient (Board) - 13 mm (9 mm special installation)
Minimum runs the length of the beam - 1.2 m
The minimum length of a run with the use of special equipment - 0.8 m
High-pass of the beam over the ground - 880 mm
The height of the rails above the ground - 600 mm
The clamp rollers - hydraulic
Overall dimensions of the saw - 1200 x1600 mm x height.2450 mm
The total length of the node with rails - 10000 mm
Weight with full equipment - 3050 kg