The bullet trap
Offer type: salePublished: 11.08.2015
| Company: | Ecoguma |
| Seller: |  Alena |
| Phones: |  0631260612; 0674011396; 0676594602 Show phone |
| Address: | Ukraine |
To ensure the physical safety of shooting ranges equipped with armour antiraketnog protection. This system is designed based on the conditions Pula-absorption when hit by a bullet anywhere in the tyre. The design of the bullet trap is designed in accordance with the actual angles of attack and planned bullet load. The most crucial element of armor protection is the front of the bullet trap, located opposite the firing line-by-line targets. Not less than 95% of the total number of shots you have in this design. The main volume bullet loads at each shooting direction falls in a spot with a diameter of about 750 mm behind the target. Annual bullet load in this spot can reach hundreds of thousands of shots. This condition defines the requirements to the material of the bullet trap is the lack of brittle destruction under repeated dynamic loading. On the other bullet catcher Tyr – ceiling and wall – to account for less than 5% bullet loads, failures in them are random in nature.
Another important factor determining environmental safety in the dash, is its acoustic quality. To improve the acoustic characteristics of the modern tyre, it is advisable to use an effective acoustic ceiling and wall panel manufacturing company "Ecohome". The level of acoustic insulation: 47dB at a thickness of 40 mm.
http://www.ecoguma.com.ua/
Another important factor determining environmental safety in the dash, is its acoustic quality. To improve the acoustic characteristics of the modern tyre, it is advisable to use an effective acoustic ceiling and wall panel manufacturing company "Ecohome". The level of acoustic insulation: 47dB at a thickness of 40 mm.
http://www.ecoguma.com.ua/
