Semiautomatic welding Kaiser MIG 235 (MMA)

Welding semiautomatic KAISER inverter type MIG-235 - a professional and reliable the device, which is used for semi-automatic welding of products from low-carbon and low-alloy steels with consumable electrode wire (0.6-1.0 mm) at a constant current, as in shielding gases (argon, carbon dioxide gas) and flux-cored wire without gas. They are also used for manual arc welding with stick electrodes (electrode diameter of 1.6 to 4.0 mm) in constant current mode (MMA mode). Depending on the type of welding, material, welding position, you can select the most suitable for welding semiautomatic KAISER inverter type MIG-235 electrode/wire. To protect from overheating to the device are provided with an efficient system of air cooling. The front panel has controls to control at work and settings. Robust housing protects vital parts from mechanical damage. Different modes of operation (arc welding electrode, semiautomatic welding with gas and without) significantly expand the scope of its use. The device is light and compact, which makes working with him a mobile and not difficult to choose a place for tool storage.
Features:
- Possibility of welding with coated electrode.
- Soft rubber two-metre welding cable, holder and earth clamp.
A six - foot welding torch.
- The extra pad that prevents the fracture of the sleeve at the point of entrance to body.
- On the front panel two digital indicator showing real current value in semiautomatic welding force and current in mode welding electrode.
- Two-position mode switch: welding electrode / welding wire.
- Network indicators and thermal protection.
- Four leveling handle: current (welding rod), the controller of the welding voltage for semiautomatic, variable feed speed of the welding wire, the regulator inductance (semiautomatic), which allows to change the characteristics of welding arc.
- Fast feed welding wire with switchable feed the shielding gas.
- Working with coils of wire: 1kg, 2.5 kg, 5 kg.
Specifications:
Type: inverter semiautomatic
Types of welding: MIG/MAG + MMA
Technology: IGBT
Nominal input current: 31 A
The limits of regulation of welding current for MIG: 30-220 And
The limits of regulation of the welding current in MMA: 40-200 And
Cooling: active air
The limits of regulation operating voltage: 15,5-28 In
Mains voltage: 220V +/-15%
Mains frequency: 50-60 Hz
Welding wire diameter: 0.6-0.8 mm
Electrode diameter: 1.6 to 4.0 mm
Power consumption at rated current, maximum: 6.8 kW
The percentage time, supply air at a current A: 60%
Efficiency: 85%
Cos Phi: 0,93
Wire feed speed: 2,5-13 m/min
The gas flow after the arc extinction: 1
Enclosure protection: IP21S
Insulation class: H
Dimensions W/h/d: 185/270/440 mm
Weight: 12 kg
Equipment: Welding machine Kaiser MIG-235, welding sleeve, with cable the earth clamp, cable with electrode holder, manual, hammer with brush, protective mask

To buy the goods, You can go to our shop for link:
http://svarmetall.com.ua/p41896412-svarochnyj-poluavtomat-kaiser.html
When buying via the website there is a cumulative system of discounts for regular customers. When buying this product on our website - delivery is free!