Semiautomatic welding the Belmash MIG 290
![Semiautomatic welding the Belmash MIG 290 Semiautomatic welding the Belmash MIG 290](http://img.bizator.com/a/2004848229/w500/1-semiautomatic-welding-the-belmash-mig-290.jpg)
Price: | 6 075 UAH |
Company: | Svarmetall |
Seller: | ![]() |
Phones: | ![]() +38097366-66-01 Show phone +38066077-06-02 Show phone |
Address: | Ukraine, Sums'ka Oblast', Sumy |
To buy the goods, You can go to our shop here:
http://svarmetall.com.ua/p41895760-svarochnyj-poluavtomat-belmash.html
Semiautomatic welding the Belmash MIG 290 (MMA) in their performance, power, compactness and performance related to professional class equipment for welding and can be used in the domestic sector - country house, cottage, garage, and small and medium enterprises in the workshops, forges and service stations, garages.
The belmash MIG/MMA 290 economically advantageous because it consumes a small amount energy during operation is 4.8 kW. Connect it to low-power domestic network 220. Line frequency - 50/60Hz. Nominal figures it working voltage is 16.5-28B. The mode of operation or the RO, with a ten-minute cycle - 70%. Welding current range is wide - from minimum - 40A, up to a maximum figure - A. Used for welding wire has a diameter of 0.6-1.0 mm, and the diameter of the working electrode, with which he works for manual welding in MMA mode - 1,6-5,0 mm Feed rollers - one pair. Efficiency is 85%. There are MMA mode. The weight of the semiautomatic machine a total of 14 pounds. Warranty from the manufacturer are - twenty-four months. Dimensions - HH mm. In picking him eager - cable elektrodvigatelei and earth cable, protective shield welding, brush-hammer and instruction manual.
Package included: ✔ welding Sleeve ✔ Cable with electrode holder ✔ the ground Cable ✔Flap welding ✔ Brush-hammer ✔ manual
SPECIFICATIONS:BELMASH MIG 290 (MMA)
The class of Professional
Power consumption, kW 4,8
Voltage, V 220
The mains frequency Hz 50/60
Nominal operating voltage, V The 16.5-28
The nominal mode of operation (RO) in cycle 10 min., % 70
Lowest welding current, a 40
Most welding current, And 290
The diameter of the wire (electrode) of 0.6-1.0
The diameter of the electrode at MMA 1,6-5,0
The number of pairs of feed the rollers 1
Efficiency, % 85
The presence of MMA is
Weight 14 kg
Warranty 24 months
Overall dimensions, mm Hg