Welding machine mig Hero 250( mma)
Offer type: salePublished: 27.08.2015
| Price: | 4 356 UAH |
| Company: | Svarmetall |
| Seller: |  Svarmetall Mihail |
| Phones: |  +38097366-66-01 Show phone +38066077-06-02 Show phone |
| Address: | Ukraine, Sums'ka Oblast', Sumy |
When
purchase through our website there is a cumulative system of discounts for regular
customers. On this item is FREE shipping!
To buy the goods, You can go to our shop here:
http://svarmetall.com.ua/p36161824-svarochnyj-poluavtomat-geroj.html
Semiautomatic welding Hero MMA/MIG inverter 250+ welding electrode
Welding machine mig Hero 250(+mma) is a semi - professional the technique used for cutting, fusing and welding of the elements, structures and components from ferrous and nonferrous metal. While welding with it can be done in inert gas or without gas flow, using cored or flux-cored wires. The features and benefits of this model are its high quality and precision welds, and the ability to withstand high working loads. In his device consists of several systems of protection against overheating and overload in the network.
Welding machine mig Hero 250(+mma) works with wire diameter from 0.6 to 1.0 mm, and electrodes with a diameter from 1.6 to 5.0 mm. are Used when working with him and the stainless steel electrodes, electrodes used for welding of heavy and complex critical structures. Management with feedback gives him the opportunity to operate on networks with weak fluctuations of plus and minus 15% of the principal indicator. Welding voltage and welding current in it is regulated smoothly. In the control has a switch to select work with different wire diameter. The model of this inverter is small in mass and size and this makes it easier its transportation to the place of work. It is suitable both for repair and installation in country houses, or garages, and for work on small and medium production, service station, workshop, forge.
Specifications:
Supply voltage, V 220
The mains frequency Hz 50/60
Control range of the operating voltage, In 16-27
The nominal mode of operation (RO) in cycle 10 min., % 60
Lowest welding current, a 40
Most welding current, a 250
The diameter of the wire (electrode) 0,6-1,0
The diameter of the electrode at MMA 1,6-5,0
The number of pairs of feed rollers 1
Maximum power consumption, kW 6,7
Efficiency, % 85
Overall dimensions, mm Hg
The presence of MMA is
Weight,kg 16
Package contents:
-Welding sleeve
Cable with electrode holder
Cable the "masses"
-Shield welding
Brush-hammer
-Manual
Features:
- Semi-automatic welding mode MIG/MAG;
- Arc welding with a covered electrode DC (MMA);
- Overload protection;
- Active cooling;
- Low power consumption;
- Steady work on weak networks.
- Adjust operating voltage;
- Adjust feed speed wire;
12 month warranty.
To buy the goods, You can go to our shop here:
http://svarmetall.com.ua/p36161824-svarochnyj-poluavtomat-geroj.html
Semiautomatic welding Hero MMA/MIG inverter 250+ welding electrode
Welding machine mig Hero 250(+mma) is a semi - professional the technique used for cutting, fusing and welding of the elements, structures and components from ferrous and nonferrous metal. While welding with it can be done in inert gas or without gas flow, using cored or flux-cored wires. The features and benefits of this model are its high quality and precision welds, and the ability to withstand high working loads. In his device consists of several systems of protection against overheating and overload in the network.
Welding machine mig Hero 250(+mma) works with wire diameter from 0.6 to 1.0 mm, and electrodes with a diameter from 1.6 to 5.0 mm. are Used when working with him and the stainless steel electrodes, electrodes used for welding of heavy and complex critical structures. Management with feedback gives him the opportunity to operate on networks with weak fluctuations of plus and minus 15% of the principal indicator. Welding voltage and welding current in it is regulated smoothly. In the control has a switch to select work with different wire diameter. The model of this inverter is small in mass and size and this makes it easier its transportation to the place of work. It is suitable both for repair and installation in country houses, or garages, and for work on small and medium production, service station, workshop, forge.
Specifications:
Supply voltage, V 220
The mains frequency Hz 50/60
Control range of the operating voltage, In 16-27
The nominal mode of operation (RO) in cycle 10 min., % 60
Lowest welding current, a 40
Most welding current, a 250
The diameter of the wire (electrode) 0,6-1,0
The diameter of the electrode at MMA 1,6-5,0
The number of pairs of feed rollers 1
Maximum power consumption, kW 6,7
Efficiency, % 85
Overall dimensions, mm Hg
The presence of MMA is
Weight,kg 16
Package contents:
-Welding sleeve
Cable with electrode holder
Cable the "masses"
-Shield welding
Brush-hammer
-Manual
Features:
- Semi-automatic welding mode MIG/MAG;
- Arc welding with a covered electrode DC (MMA);
- Overload protection;
- Active cooling;
- Low power consumption;
- Steady work on weak networks.
- Adjust operating voltage;
- Adjust feed speed wire;
12 month warranty.
