Vibrometer-balancer for measuring vibrations and field balancing

The idea creation of a portable portable device, which could be to control technical condition, which during the rotation of working equipment, and carry out dynamic balancing of rotors in their own poles, has long been in the air, as in the first and in the second case, targets are achieved through measurement of vibration parameters. And this multifunctional device was created by experts of the company Baltech, which we now consider.

Vibrometer balancer "PROTON-II-Balance" are:

• dynamic balancing of rotors in their own poles in 1 to 3 planes in 1 ÷ 4 points;

• determination of the vibration level of operating machinery in accordance with the General requirements ISO 10816-1.

In addition, the vibration meter-balancer "PROTON-II-Balance" allows to control the temperature bearing units and the rotation speed of the shaft, which makes it indispensable conducting vposlednee works.

Functional capabilities of the vibration meter-balancer "PROTON-II-Balance":

 measurement of RMS vibration velocity in the frequency range 10 ÷ 1000 Hz;

 measurement of RMS velocity and dual scale vproperties on the back or randomly given frequency;

 measurement the vibrations at the harmonics that are multiples of (0.5,1,2,3,4,5,6,7,8,9) the reverse frequency;

 analysis vibration in the ¼ - octave bands in the range 10 ÷ 500 Hz;

 temperature measurement of bearing assemblies in the range from-55º to + ÷ 130 º C (expandable);

 measuring shaft speed in the range 120 ÷ 24000 Rev / min (with expandable up to 90 000 rpm);

 to determine the phase shift between the tachometer signal and the vibration signal on the reverse frequency;

 calculation of test load wiring corrective goods by the estimated fixing;

 the calculation of the DKV (dynamic factor);

 control the alignment of composite shafts;

 storage in memory up to 200 measurements and database maintenance.

Vibrometer-balancer The proton II Balance comes with the software BALTECH-Expert, which displays the device in the category of the best in its class, allowing:

 to create routes of measurements;

 to assess condition of equipment at all levels of the hierarchy;

 to display spectra, to analyze the trends of vibration parameters, etc.

Special the advantage of the program BALTECH expert is the ability to import data from devices-cendrowska BALTECH series QUANTUM and thermal imaging cameras BALTECH that allows energy specialists and mechanics carry out a comprehensive analysis of the technical condition of the equipment the results vproconsole, balancing, alignment and thermal imaging examination.

Device Proton-II-the Balance is equipped with manual vibration meter -balansirovka, detailing recommendations for conducting vibration measurements (control points, reference card technical condition and etc.) And the methodology of balancing of rotors in their own poles.

Vibrometer-balancer Proton-II-the Balance of extremely convenient and easy to operate, but only in the hands specialist who completed training courses:

• TOR-102 Dynamic balancing

• TOR-103 The basics of vibration analysis

in one of the Training centres "Baltech" in Saint-Petersburg, Astana or lübeck (Germany)

Vibrometer balancer "PROTON-II-Balance" are:

• dynamic balancing of rotors in their own poles in 1 to 3 planes in 1 ÷ 4 points;

• determination of the vibration level of operating machinery in accordance with the General requirements ISO 10816-1.

In addition, the vibration meter-balancer "PROTON-II-Balance" allows to control the temperature bearing units and the rotation speed of the shaft, which makes it indispensable conducting vposlednee works.

Functional capabilities of the vibration meter-balancer "PROTON-II-Balance":

 measurement of RMS vibration velocity in the frequency range 10 ÷ 1000 Hz;

 measurement of RMS velocity and dual scale vproperties on the back or randomly given frequency;

 measurement the vibrations at the harmonics that are multiples of (0.5,1,2,3,4,5,6,7,8,9) the reverse frequency;