The vibrometer for the diagnosis of generators, fans, pumps. Cheap vibrometer.

Under the heating means easy to the operation of the device, which does not require any special training. It purpose - measurements of the three vibrating settings:

• Acceleration;

• Speed;

• Displacement and frequency.

Two groups of devices

One group of devices used for the protection of of human labor. Devices of this group, called the vibrometer sumarai measure vibrations that affect the human being. The devices measure vibration power for a certain period (e.g., shift) of the time showing her in the bands. For such bands are used, the normalized coefficients because the human vibration different frequencies have different effect. Using sumaru you can define on the start screen location and acoustic noise.

Another group of devices used for definition of vibration in rotating equipment. In tractor units, equipped with the rotating parts include:

• Generators;

• Pumps;

• Engines;

• Fans and the like.

With the regular turnover of the shaft, the vibration of these units will be repeated. The device to measure and display integral vibration value (a single number). RMS (root mean square) vibration velocity is the most popular value. It is proportional to power of the forces which cause vibration of the equipment. The range of measurement of vibration in the vibration meter in is 10 ÷ 1000 Hz. Specified in GOST, it gives the opportunity measure on different devices the same value of vibration.

The norm is called a limit of the vibration the value (specified in the passport of the unit or in the main Guests for the measurement vibration ISO 10816), in which the condition of the equipment is considered an emergency. Condition the equipment used is estimated by comparing current vibration with the norm. One shift is capable of measuring 100 units, issuing reports on their condition.

Monthly (through other certain time) the measurements allow to predict the development of vibration and plan repair time units, that enables you to save money company. Having a vibration value of the unit, it is possible to diagnose its defects. Note that the vibration velocity RMS allows us to diagnose the imbalance and rosencrance. Vibrometer allows to assess the condition of mounting to the Foundation and balance unit, not applying counter-phase (3-x method starts with the use of the proof mass).

Modern refrigerators can be equipped with:

• Modes of measurement signals and spectra;

• Memory to store measurements for further transfer them to a PC;

• A temperature sensor;

• Measurement modes along the route, and the like.

Our devices are.

BALTECH VP-3405 is a vibrometer with integrated in case a vibration sensor. A small device resembling a pen, is controlled one button, called vbrought and is able to measure the velocity. Used to control vibration condition of such equipment as:

• Turbines and generators;

• Motors and compressors;

• Pumps, fans etc.

Similar is inexpensive and BALTECH VP-3405-2. It gives the opportunity to measure two other vbreformer: displacement and acceleration.

Inexpensive vibration meter series "VibroPoint" BALTECH VP-3410 also allows you to measure the above 3 vbreformer. However, its vibration sensor is located on the cable and it is in addition equipped the second sensor (magnet, with magnetic clamp). The device is capable of measuring vibration at a frequency of 1 kHz-10 kHz, is applied for monitoring the technical condition Assembly and diagnostics of defects of equipment. It is used for registering vibrations of the bearing assemblies. Technical parameters of the device correspond to the ISO: 10816 (international standard).

Vibrometer Tester BALTECH VP-3450 designed to determine the state of lubrication of the bearing and diagnostics rolling bearings SPM (shock pulse method). Portable intelligent the device is able to provide data on the functioning of the rolling bearings (any the stage of operation) and to perform diagnostics of oil condition.

our proposals

The company Baltech offers services for in vibration (vibration monitoring, vproconsole) rotor equipment:

• Pumps;

• compressors;

• Fans;

• Electric motors;

• reducer;

• rolling bearings and sliding.

Similar work is done by our Department technical service (OTS). We wesham for hardware diagnostics are available in the any region of Russia, Kazakhstan and CIS countries.

You also conduct training courses rules vibration measurements using vbroker and analyzers vibration (vibration analyzer). For this there is a "Training centre improve qualifications and training of Baltech.

Welcome to the course TOR-103 "Vibration diagnostics. Methods and apparatus for the diagnosis of generators, blowers, and pumps "