Bending machine (bending machine) LR-D 3150 PST Technologies

Features:
1.
The increased stiffness of the beams of the machine with adjustable pre-tension.
2.
Durable, reliable, and durable rotary joints of the machine with improved lubrication system for friction units.
3.
Removable top bending sponge with quick replacement with another tool for making complex products: corrugated sheet, facade cassettes systems, etc.
4.
The angle of the upper lips - 20°.
5.
The lower rotary beam width - 18 mm.
6.
The minimum width of the edge bent to 180º - 5 mm.
7.
Simple and convenient stops are set to limit the rotation angle of the bending beam in repetitive bending of identical products.
8.
Receiving table with adjustable stops for support and positioning of the sheet when performing the same operations.
9.
Maximum opening width of the clamping beam is 65 mm. pressure bar closes perpendicular to the treated sheet, so the sheet does not slip forward and ensures dimensional accuracy. Spring-compensators allow easy and safe lifting and lowering of the clamping beams.
10.
Simple and reliable device adjusting the contact force of the upper beam allows you to quickly and accurately to reconfigure the machine for different thicknesses of material and to install the bending tool of different heights.
11.
The use of cutting rollers of enlarged diameter in the cutting device to produce higher quality edges of the workpieces.
12.
Additional handles on the edges of the pivoting beams provide a more comfortable work on the machine.

Package contents:

Roller knife - for cutting metal sheet directly to the bending machine.

Cutting rollers made from hardened tool steel, which ensures precise and high quality cut and a long period of work (possibility of multiple sharpening). There is a possibility of adjustment of the cutting rollers relative to the cut sheet (adjustment applies when a significant change in the thickness of the cut metal). Operation of the knife is designed for approximately 25 km metal cutting thickness of 0.5 mm.

- Protractor for visually determining the bending angle of the product;

- Angle stop turning-in - to restrict the rotation angle of the bending beam in the manufacture of the same products.

Installed on both sides of the machine.

A receiving table with supports for support and positioning of the sheet metal operations of bending and cutting.

- Additional handle - the edges of the pivoting beams provide a more comfortable work on the machine.


Main technical characteristics:

The maximum thickness of sheet, mm
Carbon steel - 0.8 mm
Stainless steel - 0.4 mm
Copper sheet is 1.0 mm
Aluminum sheet 1.2 mm

The bending angle 135°
Bending length, mm 3150
Weight, kg 370
Overall dimensions, mm 3500х700х1100