Vproconsole. DSTU ISO 18436-2-2005 vibration condition monitoring and diagnostics

Vproconsole you can prepare the route, to measure, to process the obtained data and measure:

• Vibration level according to GOST, ISO and manufacturer's recommendations equipment;

• Changes state trends in the overall level (equipment);

• General the state of the machine.

Oblast application vproconsole coincides with the use of vibration diagnostics.

What instruments the company can offer BALTECH.

Vproconsole and vbrodie rotary equipment is impossible without modern measuring devices. We have unique designs that we offer to customers.

For rapid detection of imbalance, rosencrance or weakening of the Foundation it is recommended to use vproduct BALTECH VP-3405-2 or Vibrometer BALTECH VP-3410, measure the vibration signal in the range of 10-1000 Hz. Both devices able to perform measurement three vbreformer (speed, acceleration, move hardware, but the first vibrometer sensor integrated into the housing, and the second - and made it magnetic on the cable.

For the solution of a problem of rotor unbalance is the cause of increasing vibration) designed device BALTECH VP-3470. It provides the ability to accurately balance in own bearings, the rotor, remove the vibration vibration measurements in 3 frequency bands frequencies, arranging them on a spectrum.

Devices comply with GOST ISO 10816.

Our service for you!

For staff training we have a Training centre of excellence and training of specialists of the Baltech", where training courses are held according to the rules measurement of vibration using vibration meters and analysers. We invite you to training courses in vibration TOR 103 and TOR 102 According to the standard DSTU ISO 18436-2-2005 Monitoring and diagnostics of machines. Vibration control status and diagnostics.

To provide services vproconsole and vibration diagnostics of rotor equipment, we have created Department of technical service (OTS). You will receive expert advice from our employees work on your site, accurate diagnosis, the extension in operating life of equipment and advice on further and the correct operation of the machine, to avoid accidents.