The panel of control щитоdв SCHO-06

Panel switchboards SCHO-06 is designed to receive and distribution of electric energy of three-phase AC 50Hz voltage up to 660V and protection of outgoing lines from overloads and short circuit currents.

Type of climatic version U3 according to GOST 15150.

Normal work SCHO is provided under the following conditions:

1.The height above sea level not exceeding 1000m;

2.Environment – not explosive, not containing conductive dust, aggressive gases and steams in concentrations, reducing the parameters of KTP in the invalid range;

3.Wind speed up to 36 m/s (speed of wind pressure up to 800 PA);

4.Atmosphere type II by GOST 15150.

Panel SCHO according to the degree of protection is manufactured in two versions (the first number in the designation of panel):

1 – open (degree of protection ІР00 and only from the front – IP20);

2 – closed (degree of protection IP20 and only from the bottom – ІР00).

The purpose of the panel is distributed at the introductory, sectional, distribution and support. The auxiliary panel includes the panel Supervisory control, account cabinets and end panels.

In the two-lane installation of switchgear panels comes with tire bridge the distance between facades -1000, 1500 and 2000mm .

Panel equipped with the following equipment:

1. Incoming and sectionalizing circuit – breaker retractable and stationary execution and switches

2. Distribution – automatic breakers or steady performance, the circuit breakers with fuses or RPS isolated switches with fuses of the type RBK or ARS.

By order of the products are equipped with installations for compensation of reactive power.

Panel going to transport groups up to 4 m.

Ordering example introductory panel SCHO degree of protection ІР00 with a rated current of 1600 A entries made by the scheme 01

Panel SHCHO-06-1101 U3 TU 31.2-14152239-004:2006,

Sample order tire axle distance between the facades of the cameras 1000 mm

Busbar bridge CMM-2 U3 TU 31.2-14152239-004:2006.