Three-way valve Laddomat 21-60 63°C DN32 - Termoventiler
Offer type: salePublished: 18.08.2017
| Price: | 6 430 UAH |
| Company: | Gama san-plyus |
| Seller: |  Lozko Ivan |
| Phones: |  0445585275 Show phone |
| Address: | Ukraine, Kyiv |
Three-way valve Laddomat 21-60
replaces the classic connect the individual elements guarantees efficient operation of the boiler in full load.
Use Laddomat reduces fuel consumption by 20-30%, extends the life of solid fuel boiler and chimney.
Three-way valve Laddomat 21-60 is designed:
• to rapidly achieve the boiler operating temperature.
• for mixing water coming from the boiler to the incoming water enters from the radiator or storage tank, preventing the formation of condensation and corrosion of the boiler.
• for filling the accumulation tank with hot water and ensure a low flow rate of water through the tank to maintain optimal temperature layers in the tank.
• for hot water in the accumulation capacitance after burned in the boiler all the fuel.
Laddomat 21-60 is fully automatic provided that the starting and stopping of the pump is automated. Laddomat not provide for any special care or maintenance.
Install three-way valve Laddomat 21-60 close to the boiler and at the level of its lower output. The length of the pipes should be minimal and to have the least possible bends. Be sure to eliminate areas where air can accumulate.
The diameter of the pipe from the top of the boiler to the tee and down to the Laddomat 21-60 should be as large as possible. This will reduce flow velocity and allow you to take eye-catching in the boiler the air through the expansion tank.
Read more: https://bt.rozetka.com.ua/ua/4956223/p4956223/
Use Laddomat reduces fuel consumption by 20-30%, extends the life of solid fuel boiler and chimney.
Three-way valve Laddomat 21-60 is designed:
• to rapidly achieve the boiler operating temperature.
• for mixing water coming from the boiler to the incoming water enters from the radiator or storage tank, preventing the formation of condensation and corrosion of the boiler.
• for filling the accumulation tank with hot water and ensure a low flow rate of water through the tank to maintain optimal temperature layers in the tank.
• for hot water in the accumulation capacitance after burned in the boiler all the fuel.
Laddomat 21-60 is fully automatic provided that the starting and stopping of the pump is automated. Laddomat not provide for any special care or maintenance.
Install three-way valve Laddomat 21-60 close to the boiler and at the level of its lower output. The length of the pipes should be minimal and to have the least possible bends. Be sure to eliminate areas where air can accumulate.
The diameter of the pipe from the top of the boiler to the tee and down to the Laddomat 21-60 should be as large as possible. This will reduce flow velocity and allow you to take eye-catching in the boiler the air through the expansion tank.
Read more: https://bt.rozetka.com.ua/ua/4956223/p4956223/
