Tool milling machine Optimill MZ2 and MZ4

Tool milling machines MZ2 and MZ4:

§ Fbackup machine series MZ widely versatile, has two spindle (horizontal and vertical).

§ Vertical spindle easily folds and a milling machine is horizontal.

§ These milling machines for metal allow processing of relatively large parts of the two planes (Y, Z) alternately without reinstalling and reversal of the workpiece, which significantly reduces the time for installation and deployment of the workpiece on the table.

§ On the operator control panel includes a monitor the device's digital readout (NEWALL DP700) axes of the machine, allowing to track the movement of the axes X, Y. Z.

§ All guides milling machine for metal are hardened and ground and have alignment by means of the tightening wedge strips along the axes X, Y. Z axis adjustment is done by tightening the flat rail.

§ Automatic feeding has the possibility of smooth adjustment in all three axes X, Y, Z, facilitates processing surfaces with uniform roughness and to select the optimal modes cutting.

§ On all axes milling machine for metal set ball screw HIWIN The Taiwanese manufacturer, made with high adaptability, allowing to achieve precise movement of the axes of the machine at the specified position.

§ In the upper part of milling machine is box speed selector table to adjust the frequency of rotation the spindle, with a comfortable flywheels to switch gears at the required speed.

§ Bed milling machine for metal series MZ made of cast iron, last the aging process not less than 6 months, the guides thermally processed and grinded with high precision.

§ The machine has a hinged protective cover, large viewing Windows are made from impact-resistant transparent material, allow you to safely observe the processes of machining and prevent splashing of coolant and shavings on the floor around the working area of the machine.

§ Milling machine for metal features of MZ series automatic lubrication for guideways and ball screws. This function eliminates human error and allows you to submit batch grease on the rails, thus extending the service life.

§ Automatic feed of the coolant takes place in the area cutting.

§ For the convenience of the operator milling machine metalinstalled halogen lamp with flexible stem, designed for local lighting of the working area.

§ The machine is designed for precision machining surfaces of the part.

§ In all axes of a milling machine installed flywheels move the table with the limbs through which you can move the table on the required value at the coordinates X, Y, Z.

§ Electrical Cabinet milling machine safely protected from moisture and has a rubber seal along the contour of the door.

§ For ventilating and cooling electrical Cabinet equipped with ventilation channels with built-in air filters and fans, protecting the components of the Cabinet from dust and overheating filters are easily removable and can be cleaned with water and use a long time.

Technical features:

 

MZ2

MZ4

Horizontal milling table

750*320 mm

900*500 mm

The distance between the vertical the horizontal milling spindle and table

75 - 410 mm

40 – 410 mm

Horizontal milling table T-shaped grooves

5*14*63 mm

7*14*63 mm

Horizontal milling table load capacity.

260 kg

360 kg

The departure of the vertical spindle

100 mm

185 mm

Cone vertical spindle

ISO 40

ISO 40