Machine milling multi-purpose 6Р83Ш.
Offer type: salePublished: 07.08.2020
| Price: | negotiated |
| Company: | Universalmash |
| Seller: |  Vasilij Pavlovich |
| Phones: |  +38 097 334 7103 Show phone |
| Address: | Ukraine, Odessa oblast', Odesa |
Machine milling multi-purpose model 6Р83Ш, 1978.in. manufacturer Gorky plant of milling machines, in good working good technical condition, connected.
Dimensions of table working surface (length x width), mm 1600 x 400
The smallest and largest distance from spindle nose to table mm 30 450..
Distance from axis of spindle to trunk, mm 190
Distance from spindle nose to swivel head of the table, mm 70 570..
Distance from spindle axis swivel head to the bed rails (overhang), mm 250 900..
Greatest travel of table longitudinal mechanical/ manual, mm 1000/ 1000
The greatest movement of the table transverse mechanical/ manual, mm 300/ 320
Greatest travel of table vertical mechanical/ manual, mm 410/ 420
Maximum table load (center), kg 300
Number T-slot Size T-slot 3
Move the table one notch limb (longitudinal, transverse, vertical), mm 0.05
Travel of table per revolution of the limb longitudinal and transverse, 6 mm
Travel of table per revolution of the limb vertical, mm 2
Rapid travel of table longitudinal/cross/vertical mm/min 3/ 3/ 1
The number of stages of the working table feed 18
Limits of working feeds. Longitudinal and transverse mm/min 25...1250
Limits of working feeds. Vertical, mm/min 8,3...416,6
The cutting force of the longitudinal,transverse,vertical feed,N 20,0/ 12,0/ 8,0
Rotation speed of spindle turning and invoice heads, rpm 50..1600
Number of spindle speeds 11
The spindle speed, rpm 31,5 1600..
Number of spindle speeds 18
The movement of the quill spindle, mm 80
Moving the tailstock spindle in one division of the limb, mm 0,1
Move tailstock spindle one turn of the limb, mm 6
Turn spindle head to the machine bed/ from bed, deg 90
Rotation of the spindle head in longitudinal plane, deg 360
Turn invoice the spindle head in longitudinal plane, deg 360
The greatest torque on the spindle N. m 1430
A sketch of the end of the horizontal spindle according to GOST 836-72 3
A sketch of the end of the spindle, the rotary head according to GOST 836-72 4
A sketch of the invoice end of a spindle head according to GOST 836-72 4
Spindle taper 50
Allowable diameter cutters for roughing. Horizontal/ vertical spindle, mm 200/ 100
Off stops the flow (longitudinal, transverse, vertical) is
The lock is manual and mechanical feed (longitudinal, transverse, vertical) is
Lock separate on the filing is
Automatic intermittent feed of the Longitudinal is
Automatic intermittent feed of the Transverse and vertical no
Braking of the spindle is
Overload protection (clutch) there is
The number of motors on the machine 4
The motor of main drive, kW 10
The motor spindle swivel head, 3,0 kW
The electric motor drive feed, kW 3,0
The electric pump coolant, kW 0,125
Machine dimensions (length x width x height), mm 2680 x 2260 x 2040
Weight of machine, kg 4500
