The fuel dispenser refills diesel fuel flow meter WALL TECH 40, 12 V, 40 l/min

The fuel dispenser refills diesel fuel flow meter WALL TECH 40, 12 V, 40 l/min
Ideal for field conditions where there is no power supply 220V. Can be used as fuel dispensing equipment fuel truck. Ideal for filling diesel fuel agricultural and construction equipment, boats and motor boats. The pump has a built-in bypass valve, which "leads" the fuel when the pump and closed the distributing valve.

Features: Pump: 12V
Current work: 21A
Capacity: 40 l/min
The cycle of continuous operation: 30 min
The outlet pressure max: 1.3 Bar
The height of the dry suction: 2 meters
Bypass valve: Yes
Inlet: ¾' BSP
Outlet: ¾' BSP
Built-in pump filter: no
Operating temperature range: -20C/+50C
The maximum viscosity of the fluid: diesel
Allowed fluids: diesel
Smoking liquid: gas, alcohol, water, gasoline, kerosene
Maximum noise level: 75 dB
Net weight: 10.5 kg
Gross weight: 11.5 kg

Included:
• self-priming vane pump with bypass valve
• cord with gear clamps - "crocodiles" - 2.5 m
• electric switch (pump casing)
• fuse 30A
• mechanical counter Flow Tech 3C
• fuel delivery hose 4 meters with a diameter of 19 mm (¾') with the fittings necessary to connect to the gun
• aluminum fuel dispensing gun without clipper with built-in swivel coupling, female thread 1' BSP
• coarse filter under suction hose 25 mm (1')
• metal plate on which is fixed the meter and pump

The pump is supplied without the suction sleeve. Complete suction hose of any length (it is recommended to install the pump no further than 10 meters from the tank).
Category catalog Prom.ua: Equipment for filling stations, tank farms in Kiev