Cantilever pumps monoblock type 1

Cantilever pumps monoblock type 1
Pumped liquid:

Technical water (except sea) with a pH of 6-9,5, mechanical impurities not more than 0.1% by volume and particle size of not more than 0.2 mm, as well as other liquids similar to water in density and chemical activity.
Fluid temperature:
for pumps CM and KM - from 263 to C (from -10 to +85 C);
for pumps CM and KM - from 263 to C (from -10 to +105 C).

Legend:

The pump CM-32-125-with-U3.1 TU-216-05747979-2003
Where 1 is a modification of the pump;
To console;
M - single block;
50 - diameter of inlet pipe; mm;
32 - diameter; mm;
125 - nominal impeller diameter; mm

Conventions on the graphical characteristics:
Q - flow, m3/h;
H - head, m,
N is the maximum power consumption, kW;
n - rotational speed, Rev/min;
- Efficiency, %;
- allowed positive suction head;
Summary table of technical characteristics of pumps types of 1KM.
Brand unit Flow, m3/h Head, m speed, rpm power, kW allowed positive suction head, m
CM-32-125-12.5 20.00 2900 1.40 3.50
CM-32-125-t 12.5 20.00 2900 1.40 3.50
CM-32-125-12.5 18.00 2900 1.20 3.50
CM-32-125-t 12.5 18.00 2900 1.20 3.50
CM-32-125m-12.5 22.00 2900 1.60 3.50
CM-32-125m-t 12.5 22.00 2900 1.60 3.50
CM-50-160-25 32.00 2900 4.30 3.80
CM-50-160-t 25 32.00 2900 4.30 3.80
CM-50-160A-20 30.00 2900 3.10 3.80
CM-50-160A-t 20 30.00 2900 3.10 3.80
CM-65-160 m-50 38.00 2900 8.30 4.00
CM-65-160 m-t 50 38.00 2900 8.30 4.00
CM-65-160-50 35.00 2900 8.70 4.00
CM-65-160-t 50 35.00 2900 8.70 4.00
CM-65-160A-45 30.00 2900 6.60 4.00
CM-65-160A-t 45 30.00 2900 6.60 4.00
KM-80-160-100 34.00 2900 4.50 13.60
KM-80-160-t 100 34.00 2900 4.50 13.60
KM-80-160A-90 28.00 2900 11.00 4.50
KM-80-160A-t 90 28.00 2900 11.00 4.50
KM-80-b-80 23.00 2900 8.80 4.50
KM-80-b-t 80 23.00 2900 8.80 4.50

The inlet pressure to the pump, MPa (kgf/cm2), not more than:
for KM and KM - 0,35 (3,5);
for KM and KM - 0,6 (6,0);
Category catalog Prom.ua: centrifugal Pumps in Kiev