Double-layer corrugated sewer pipe polyethylene Korsis and polypropylene They are about

Double-layer corrugated sewer pipe polyethylene KORSIS and polypropylene THEY are ABOUT
Double-layer corrugated sewer pipe made of polyethylene are used for construction and repair of external pressure and storm sewer for drainage of sewage and other liquid and gaseous media, to which polyethylene is chemically stable at a constant operating temperature from 0 to 45 deg. with regard to short-term increases in temperature up to 60 deg., and to protect communication cables. Pipes are produced according to DSTU B C. 2.5-32:2007 "non-pressure Pipes made of polypropylene, polyethylene, geplastificeerd PVC and fittings for external Sewerage of buildings and cable duct" LLC "Kyiv pipe plant", and according to its own specifications for LLC Klimovsk pipe plant".

Pipes are produced from polyethylene HDPE (HDPE) class PE 63, PE 80 and polypropylene PP (PP) ring stiffness SN4, SN8 and SN16 nominal diameters from 110 to 1200 mm for installation at depths from 1 to 20 meters. The outer surface of the pipe black (to improve sitosterolemia properties) is a corrugated profile, the design of which provides the desired ring stiffness. The internal surface is smooth white, go blue (They are About color, which facilitates visual inspection and diagnosis of the condition of the pipe. Pipes are available in straight segments of length 6,12 m In agreement with the customer it is possible to manufacture pipe segments other standard lengths.

According to standards DSTU B C. 2.32:2007 products Inspection pipe plant", was mandatory conformity assessment procedure by certification, which can be certified by a certificate of conformity UA1.107.0009388-09. In addition to the required certificates and permits for sewer pipes, RTZ passed the conformity assessment procedure quality system ISO 9001, the document does state that the plant produces products which corresponds to the best standards in this segment.

Double-layer corrugated sewer pipe for gravity-flow storm drainage and have advantages over pipes made of traditional materials - concrete and cast iron:

Sewer pipe corrugated on skade

Sewer pipe They are About SN16
- lifetime polymer sewer pipe is much longer than the traditional 50 years;
- not afraid of contact with water and are resistant to the most aggressive environments;
- corrugated sewer pipe polyethylene overgrown on the inner surface there are no deposits during operation;
- tubes are not susceptible to the ravages associated sewer gas high aggressiveness;
double - layer corrugated sewer pipe 8-10 times lighter than cast iron and concrete;
double - layer corrugated sewer pipe capable of withstanding variable loads from the ground;
- tightness of the connection of these pipes is much higher than the tightness of the connection pipes made of traditional materials;
- place pipe connection requires no additional consumables (bitumen, waterproofing, and so on );
for sewer corrugated polyethylene pipes there is the possibility of multiple remounting at low cost;
- installation of polyethylene pipe by the method of propulsion;
- drains, frozen inside a plastic sewer pipe, will not hurt her;
double - layer corrugated polyethylene pipes toxicologically and bacteriologically safe;
- easy to maintain (such tubes can be easily replaced and repaired);
- bend at a small angle can be realized by turning the pipe in the socket connection.
- the main advantage of two-ply corrugated sewer pipe polyethylene polymer before the sewer pipe with a smooth (solid) wall - much less weight is 2.5-3 times, while maintaining ring stiffness.