I will sell pumps To

Pump type It is designed to work in a hospital for pumping clean water (except sea) with a pH of 6...9, a temperature from 0°C to + 85°C and other liquids similar to clean water in density, viscosity and chemical activity, containing solids up to size 0.2 mm, the volume concentration which does not exceed 0.1%. Pump shaft seal - single lip seal. The material parts of the flow - gray cast iron. The intended use of the pumps according to the parameters in the nominal mode and the nominal diameters of the impellers Pump model Flow m3/h Head, m century Art. Permitted cavitat. stock, m, not more pump Power, kW Power drive El. min., kW pump efficiency, %, not less Leakage through the gland seal, l/h, not more than the rotation Frequency, Rev/min inlet Pressure, kg/cm2, not more than Nom. the diameter of the slave. wheels, mm K8/18 8 18 3,8 0,9 1,5 53 2 2900 2 127 C/30 20 30 3,8 2,7 4 64 162 C/30 45 30 4,3 4,3 7,5 70 168 C/20 90 20 5,5 5,5 7,5 78 148 K160/30 160 30 4,2 17,5 30 75 3 1450 3,5 329 C/30 290 30 4,2 29 37 82 326 K50-32-125 12,5 20 3,5 1,24 2,2 55 2 2900 139 K65-50-160 25 32 3,8 3,4 5,5 60 160 K65-50-160A 20 30 3,7 2,8 4 60 159 K-65-160 50 32 4 6,2 7,5 70 165 C-50-200 50 50 3,5 10,5 15 65 200 C-50-200A 45 40 3,5 8 11 61 192 C-80-160 100 32 4,5 11,9 15 73 170 C-80-160A 90 26 4,5 9,2 11 69 164 K-65-200 100 50 4,5 18,9 30 70 205 K-65-200A 90 40 15,3 4,5 22 65 187 K-65-250 100 80 4,5 32,5 45 67 245 K-65-250a 90 67 4,5 26,1 37 63 225 C-125-250 200 20 4,2 13,4 18,5 81 3 1450 276 C-125-315 200 32 4 22,9 30 76 325