Butt segment (weld) fittings for polyethylene water pressure pipes PE and PE100
| Price: | negotiated |
| Company: | TPK TEHNOPROM |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +380 (96) 889-77-77 Show phone |
| Address: | Ukraine, Kyiv |
Segment (weld) fittings are designed for a variety of taps and connections polyethylene water pipes during installation. Connection fittings with pipe is carried out by welding. In rare cases it can be used to connect and temperature resistant welding.
All welded fittings are manufactured according to TU Century 2.7-25.2-32926466-004:2007 LLC inspection pipe plant" of the pipes on THE other IN B. 2.7-25.2-32926466-002:2005 polyethylene brand PE and PE100. For the manufacture of fittings used shop welding equipment company Georg Fischer - WM 315, WM 630 and BS 315, BS 630. This equipment allows to produce T-shaped tees, bends under 30 °, 45 °, 60 °, 90 ° degrees, reducing transitions and to produce elongation of short bertovich sleeves and transitions. Range vypuskaemoj products segment fittings from 90 mm to 630 mm, with standard dimensional relations SDR 26 SDR 9. Fittings larger diameter (up to 1200 mm) manufactured Ledger POLYPLASTIC (Russia) LLC Klimovsk pipe plant".
Pipelines, which are mounted by means of welded fittings are designed for transporting water, including drinking water, air, and other liquid and gaseous substances to which the polyethylene is chemically stable at temperatures from 0 °C to 40 °C, maximum operating pressure of from 0.25 to 2.5 MPa.
