Sand blasting apparatus or blasting apparatus ASO-150, ASO-A.

Sand blasting apparatus or blasting apparatus are designed to clean the air sandblasting method of inner and outer surfaces from paint, scale and corrosion, various contaminants, degreasing and preparing surfaces for painting, repairing. TECHNICAL CHARACTERISTICS OF THE SAND BLASTING APPARATUS OR BLASTING MACHINES Model ASO-A ASO-150 Performance by cleaning the surface, m2/ h 0,8 ... 3 4 ... 20 Compressed air consumption, m3/ min 0,6 ... 1 2 ... 5 Operating pressure, ATM. a 3.5 ... 6 3,5 7 ... Chamber volume, l 35 150 The abrasive flow rate per 1 m2, kg 35 35 ... 40 ... 40 The inner diameter of the hose sand 16 25 Remote control - + Weight, kg 30 150 Overall dimensions (length, width, height), cm HH HH SELECTING A COMPRESSOR FOR SANDBLASTING MACHINES To work with sandblasting apparatus ASO-A the required compressor capacity 0,5 ... 1 m3/min Factory offers reciprocating compressors SM, SM. To work with the blasting apparatus ASO-150 required compressor capacity 2 ... 5 m3/min Factory can offer brand K3, with capacity of 2 m3/min WHAT TO USE AS AN ABRASIVE FOR SANDBLASTING APPARATUS ASO-A AND ASO-150. When working with devices blasting abrasive material, it is recommended to use steel or cast iron sliced with particle size for the apparatus ASO-A 0.1 to 0.8 mm, and apparatus for ASO-150 0.1 to 1.8 mm It should be noted that when working in sand-blast apparatus must be capable of collecting abrasive for re-use. Abrasive powder THAT 3989-001-32115845-2002 designed for blasting the following surfaces: * Metal - removal of old coatings, mill scale and rust before applying the protective coating; * Brick, concrete, stone - removal of old coatings, removal of destroyed and thawed areas in the repair and before painting. Supplied with sand blasting apparatus includes: * nozzles made of steel - nozzle diameter 10mm + spare nozzle diameter 8, 10mm (ACOE) and nozzle diameter 10mm + spare nozzle with a diameter of 10mm (USA); When working with jet clean brand ASO-A and ASO-150 used nozzle with a diameter of 8 mm and 10 mm Supplied with sand blasting apparatus includes a nozzle made of heat-treated steel 45. Resource nozzles of this material is about 200 hours. If necessary, we can supply a sandblast nozzles of more wear-resistant material of boron carbide. The endurance of the same nozzle is 900-1000 hours. Category catalog Prom.ua: Other industrial equipment in Kiev