Hammer pneumatic MOS-4

Specifications:

Name Value
Compressed air pressure nominal; (kgf/cm2) 5
Compressed air pressure minimum; (kgf/cm2) 3
The energy of a single blow; j (kgf. m) 55
The frequency of shock; C-1 (BPM) 17,0
Power; (W) not less than 945
The consumption of free air (m3/min) of 1.35
The mass of the hammer without tools; (kg) 8,5
The length of the hammer without tools; (mm) 580
The inner diameter of the sleeve; (mm) 16
The length of the shank of the tool; (mm) 70
The diameter of the shank of the tool; (mm) 24

Hammers pneumatic MNP-2, MNP-3, MES-4 is designed for loosening hard and frozen ground, punching openings and holes in the brick walls of buildings, dismantling brick masonry, splitting ice blasting coal of various FORTS, mining the soft ore, clay, slate, and other construction and mining.

The hammers pneumatic data brands, there is a complete list of spare parts and components:

* delivery hose with a diameter of 16 mm and 18 mm for connecting the hammer to the compressor, designed for pressures up to 10 ATM;
* peaks
* blades
* chisels made from high strength tool steel u
* air distribution mechanisms
* spring leaf
* drummers
* Patagonia valve, etc

The pneumatic hammer marks MOS-2, by its characteristics, is similar to the hammer pneumatic brand MO-2, MO-2B. Used in the production of soft rock, coal, soft to medium-fortress, asphalt, bricks, ice.

For jobs that require relatively large impact energy, it is necessary to apply a pneumatic hammer marks MOS-3, which is similar to the hammer MO-3A, MO-3B. Hammer pneumatic MOS-3 is used for crushing of coal to a variety of castles, slate, brick, asphalt, lightweight concrete, etc.

To the shock of the destruction of structures made of stone, heavy and reinforced concrete, semi-bedrocks, frozen and hard soils used a pneumatic hammer with a big impact energy brand MNP-4, which is similar to the hammer striker MO-4A, MO-4B.

Chipping hammer brand MO-2K - hammer in China. According to its technical characteristics, it is close to chipping hammer MOS-3, MO-3B. Has the same impact energy and approximately the same air flow.

Chipping hammer MO-2K has a relatively low cost, and the combination of concepts such as price - quality is quite acceptable option for those who are limited in their financial resources. It is used for crushing of coal to a variety of castles, slate, brick, asphalt, lightweight concrete, etc.