The vibrator pad YVES-B

Production of JSC "Yaroslavl plant "Krasny Mayak (Russia)

Vibrators pad Electromechanical is a centrifugal vibromechanical, in which the input electrical energy is converted into the energy of mechanical vibrations - vibration. Vibrators pad Electromechanical find wide application in many branches of economic activities of the engineering, industrial, civil, energy and road construction. Depending on technological purposes, the plant produced: vibrators pad Electromechanical General purpose (attached to the process equipment and vibrators deep, and for the examination of concrete mixtures in industrial production of concrete blocks, large monolithic structures, bridge jumpers, as well as the skeletons and shells of monolithic construction.
Circuit pad vibrator Vibrator General purpose

Diagram of the device of the vibrator pad Electromechanical

Vibrators pad Electromechanical General purpose used for mechanization of the main and auxiliary processes, compaction, transportation and unloading of bulk materials, dehydration and granulation of feed and food, etc.

The vibrator pad Electromechanical General purpose is an asynchronous motor with squirrel-cage rotor mounted on the shaft de-balancers. Its design provides vibration resistance of the stator winding and the mechanical strength of the rotor shaft, the bearing unit and body parts. The stator of the motor has a built in die-cast aluminium housing with a box of pins and reinforced fastening elements to vibromechanical. The rotor shaft is supported by bearings. Unbalanced adjustable nodes covered with a protective shroud.

In the terminal box of the vibrator pad Electromechanical installed terminal panel for connecting the terminals of the stator with the current-carrying cable. Regulation of driving force and the amplitude of oscillation by varying the configuration of the non-balances.

When the rotor of the motor occur circular oscillations of the vibrator pad Electromechanical and attached mechanism.

Vibrators pad Electromechanical indicated by mark "B" or "A" are vibrators made in the ordinary performance with the use of standard parts and components.

Vibrators pad Electromechanical indicated by mark "N" is the vibrators high reliability. This brand of vibrators pad increased dust and moisture protection, have a cast iron shields, double impregnation of windings, individual choice sets were successfully met (manual build). The vibrators platform of the brand increased operating life at least three times.

Vibrators pad Electromechanical indicated by mark "E" is the vibrators working from the usual single-phase mains voltage of 220V.
Depending on the size of the tank requires one or more pad vibrators. If you are using one vibrator pad, it must be screwed to the wall, which makes with the horizontal plane, the smallest angle. The height of attachment of the vibrator pad should be 1/3 of the total length of the conical portion of the hopper. It is recommended to strengthen the vibrator pad horizontally on the element stiffness length of 500-1500 mm (channel). The distance between the ends of the channel and the walls of the hopper or stiffening of the hopper should be not less than 200 mm When one bin are several vibrators pad, the minimum distance between them vertically should be 100 mm

For vibrating tables, racks, beam shapes, cassette units, and most other forms recommended vibrators platform, operating at a frequency of 3000 rpm./min and above (EV-320, EV-E, YVES-B, YVES-E, YVES-N, YVES-B, YVES-E, YVES-N, IV-107, IV-105-2.2, YVES-01-50, IV-05-50, IV-11-50, IV-20-50, IV-40-50, IV-60-50).

Specifications

Name Value
Number of poles 2
The speed of rotation.min (Hz) 3000 (50)
Driving force (kN) 5,6 11,3...
Static torque (kg*cm) 5,7 11,4...
Power supply voltage (V) 42; 380; 3 phase
Current frequency, (Hz) 50
Nominal power (kW) 0,55
Power consumed (kW) 0,90
Weight (kg) 20
A work resource (HR) 700
Category catalog Prom.ua: Vibrators pad in Kiev