Vibrators deep YVES-75, IV-113 IV-116A, YVES-116A-1,6, IV-117

Vibrators deep Electromechanical hand with flexible shaft designed to seal concrete mixtures when laying them in a monolithic design with different degree of reinforcement, as well as the manufacture of concrete and reinforced concrete for precast construction. Mechanical vibrations generated by the vibrator deep in his immersion in the concrete mixture promotes the compaction of concrete.

The main advantage of the deep vibration is the ability to seal the concrete with a lower water content, which increases the strength of concrete increases its water resistance, frost resistance, wear resistance and reduces the solidification time. This vibration improves the adhesion of concrete with steel reinforcement and in the joints between fresh and hardened layers of concrete.

Using immersion vibrators can be sealed with plastic and low-slump mixtures with a draft standard cone from 0.5 to sm kit vibrator deep Electromechanical hand with flexible shaft consists of a motor, flexible shaft and the vibration tip.

Vibrators deep YVES-75, IV-113 IV-116A, YVES-116A-1.6, YVES-117A, EPA-1300 manufactured in accordance with technical specifications TU 4833-007-00239942-2002 "Vibrators electric deep".
Kit vibrator deep

IV-75 consists of: motor YVES-75, shaft length 3M, vibration tip with a diameter of 28mm.

IV-113 consists of: motor IV-113, shaft length 3M, vibration tip with a diameter of 38mm.

YVES-117A consists of: motor YVES-117A, shaft length 3M, vibration tip with a diameter of 51mm.

YVES-116A consists of: motor YVES-116A, shaft length 3M, vibration tip with a diameter of 76mm.

YVES-116A-1.6 consists of: motor YVES-116A-1.6, shaft length 3M, vibration tip with a diameter of 76mm.

Vibrators can be equipped with shafts of different length 3.0 m, 4.0 m, 4.5 m or 6 metres, as well as vibromechanical different diameter 28 mm, 38 mm, 51 mm, 76 mm, shaft Length and diameter of the vibration tip are selected depending on the specifics of the operations and conditions of their application.

The diameter of the vibration tip is selected with consideration of the distance between the reinforcement bars, which must be not less than 1.5 times the diameter of the vibration tip.

The mode of operation according to GOST 12.2.013.0-91 vibrator deep:

IV-75, IV-113 IV-117A, EPA-1300 - long.

YVES-116A - 6 minute work period and a 4 minute shutdown period

The vibrator deep YVES-116A -1,6 - vibrator is high reliability, can work continuously for a long time.
The Assembly of the vibrator deep is made in the following sequence:

To connect the shaft with vibromechanical.
Fasten the shaft to the motor.


Disassembly is performed in the reverse order of Assembly of the vibrator deep.

For the vibrator to turn on the motor and make sure the vibration of the vibration tip. To start the vibration tip slightly to hit the lower part of the shell on a hard surface. When you vibroacoustic should be immersed in the concrete for the entire length of the working part. Immersed in the concrete and remove vibroacoustic concrete only when the electric motor.

During operation not permitted tension and sharp bends flexible power shaft with the armor. The bend radius should be less than 200mm for vibrator deep YVES-75 and EPA-1300 complete with vibromechanical diameter 28mm, 300mm and less for the other vibrators. To avoid overloading of the motor and premature failure of parts of the vibrator deep not allowed to clip the vibration tip between reinforcement bars or between bars and forms.

In connection with works to improve the design and technology of the manufacturer of any discrepancies between the description and the delivered product does not affect its technical characteristics and maintenance.

These vibrators deep certified for safety in accordance with the requirements of normative documents:
GOST 12.2.013.0 - 91; GOST R 50615 - 93; GOST 12.2.030 - 2000; GOST 17770 - 86; GOST R 51318.14.1-99, GOST R 51317.3.2-99, GOST R 51317.3.3-99

Vibrators deep correspond to the execution of The category 2 GOST 15150 - 69 and are intended for operation in areas characterized by the following conditions:

* altitude above sea level not exceeding 1000m;
* the environment should be explosion-proof, unsaturated conductive dust, containing no corrosive gases and vapors in concentrations that may cause fracture of metals and insulating materials;
* ambient temperature: vibrators deep YVES-75, IV-113 IV-116A, YVES-116A-1.6, YVES-117A from +40 to 45C; for vibrators deep EPA-1300 from +40 to -25 °C.
Category catalog Prom.ua: Vibrators deep in Kiev