Ultrasonic heat meter ULTRAHEAT-UH50
| Price: | negotiated |
| Company: | TPK TEHNOPROM |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +380 (96) 889-77-77 Show phone |
| Address: | Ukraine, Kyiv |
The heat meters UH50 designed to measure the consumption of heat in the heating systems that use water as a coolant. Heat meter, with appropriate modifications, is suitable for measurement of cold (only cold or in combination with measurement of heat) or for a "pure" measure water flow.
Heat meter ULTRAHEAT® UH50 is a modernized version of the wide-known meter 2WR5. In the new heat significantly enhanced archiving, increased the number of communication modules, including radio and plug-in two additional flow meters with pulse outputs simplified display through the use of two buttons.
MAIN TECHNICAL SPECIFICATIONS
Nominal diameters, mm: DN15 - DN100
Maximum temperature: 150 °C
Rated pressure, bar: PN16 (threaded), PN25 flanged)
Nominal spending Qn m3/h: 0,6 - 60
Maximum / minimum flow rate, Qmin / Qmax: 0,01 Qn / 2Qn
Accuracy class (according to DSTU 3339-97): 4
CALIBRATION INTERVAL: 4 years
MAJOR MODIFICATIONS OF THE COUNTER
UH 50 A - heat two-wire temperature sensors for installation of flow meter in the return pipe;
UH 50 In - heat two-wire temperature sensors for installation of flow meter in the supply line;
UH 50 - combined counter hot / cold with two-wire temperature sensors for installation of flow meter in the return pipe;
UH 50 G - counter cold with two-wire temperature sensors for installation of flow meter in the return pipe;
UH 50 D - flow-meter of water (without temperature sensor).
