Ultrasonic multi-channel heat Supercom-01-1
| Price: | negotiated |
| Company: | TPK TEHNOPROM |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +380 (96) 889-77-77 Show phone |
| Address: | Ukraine, Kyiv |
Ultrasonic multi-channel heat Supercom-01-1
The heat meter is designed to measure the consumed heat energy in the open and closed heating systems.
Heat meter Supercom-01-1-SKS-3 is produced using the components of the heat meter SKS-3 and the ultrasonic flowmeter 2WR7 company Landis + Gyr GmbH (Germany). Heat meter with appropriate equipment provides the ability to measure two independent systems of heat.
MAIN TECHNICAL DATA
* Accuracy class for measuring the amount of heat (DSTU 3339-96): 2,5/4;
* Accuracy class for measuring water flow: 2;
* Orifice flow meter DN, mm: 15-100;
* Nominal pressure: socket connection PN16, PN25 flange connection;
* Range of nominal expenditure Qn m3/h: 0,6-60;
* The minimum flow rate, Qmin: 0,01*Qn;
* Maximum flow rate, Qmax: 2*Qn;
* Does not require sedation areas before and after the flow meter;
* Maximum temperature: 150;
* Number of channels of the heat meter for measuring the flow: 5;
* Number of channels of the heat meter for measuring the temperature of the medium: 5;
* Number of channels measurement pressure: 2;
* Ability to print the archive to the printer directly from the flowmeter;
* Accumulation and archiving average hourly, daily and erroneous settings TEPLOSET, and Protocol errors.
* Autonomous power from the lithium battery 3,6 V
CALIBRATION INTERVAL established by the State Committee of Ukraine for technical regulation and consumer policy - 4 years.
