Rotary gas meters DELTA
| Price: | negotiated |
| Company: | TPK TEHNOPROM |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +380 (96) 889-77-77 Show phone |
| Address: | Ukraine, Kyiv |
The DELTA counters are designed for commercial metering of natural and other non-aggressive gases at pressures up to 100 bar. The counters may be of special design to account for hydrogen.
Based on the use of volumetric measurement principles, counter rotating DELTA does not enforce the straight sections of the pipeline before and after the meter to its normal functioning. The meter can be installed in the immediate vicinity of the filter, shut-off devices or the gas pressure regulator.
Counters can be used in conjunction with electronic volume corrector gas temperature UNIFLO 1000TCE or volume corrector gas temperature and pressure SEVC-D (CORUS).
Counters can be supplied with wire contactless LF pulse sensor CYBLE_SENSOR_ATEX V2, mounted on a readout device for remote transmission of signals, the number of which is proportional to the elapsed amount of gas on the recording of the electronic device. The sensor CYBLE_SENSOR_ATEX V2 detects unauthorized magnetic field influence on the work of the LF sensor and registers the flow direction, allowing to take into account the actual volume of gas in the forward direction with automatic lock considering the amount of gas which has passed in the opposite direction.
Registered in the State register of measuring instruments under No. 13839-09.
The calibration interval is 5 years.
raimunda
* Maintained high metrological characteristics over the entire service life
* No requirements to comply straight sections of the pipeline before and after the counter
* Wide measurement range Qmin/Qmax (1:200)
* Advanced values of transition costs, establishing limits of permissible relative error counters:
o for meter calibration measurement range Qmin/Qmax 1:50 (1:20, 1:30):
+ Qmin Q Of 0.1 Qmax ±2%
+ 0,1 Qmax Q Qmax ±1%
o for meter calibration measurement range Qmin/Qmax 1:50 (1:200):
+ Qmin Q Of 0.05 Qmax ±2%
+ 0,05 Qmax Q Qmax ±1%
* Low pressure loss
* Options body material: aluminum, steel casting, cast iron
Distinctive features
* Sizes from G10 to G650
* Wide measurement range of costs from 0.4 to 1000 m3/h (under operating conditions) in pipelines from DN 40 to 150 mm
* Flanges: ISO PN10 ISO PN110, ANSI125 - ANSI600
Category catalog Prom.ua: gas Meters in Kiev
