Turbine gas meters TZ/FLUXI Itron (Actaris)

Counters TZ/FLUXI designed for commercial metering of natural and other non-aggressive gases at pressures up to 100 bar.

The counters are equipped with built-in truetypemenu, smoothing the potential disturbance of the gas flow at the entrance to the counter.

Counters can be used in conjunction with electronic gas volume corrector SEVC-D (CORUS).

Counters can be supplied with wire contactless LF pulse sensor CYBLE_SENSOR_ATEX V2, mounted on a readout device for remote transmission of signals, the number of which is proportional to the elapsed amount of gas on the recording of the electronic device. The sensor CYBLE_SENSOR_ATEX V2 detects unauthorized magnetic field influence on the work of the LF sensor and registers the flow direction, allowing to take into account the actual volume of gas in the forward direction with automatic lock considering the amount of gas which has passed in the opposite direction.

Registered in the State register of measuring instruments under No. 14350-07.

The calibration interval is 8 years.

Advantages

* Requirements to comply with direct gas pipelines: 2 DN up to the counter and 0 DN downstream of the meter
* Ability periodic calibration in a narrow range of costs from Qmin to 0.4 Qmax
* Low pressure loss
* Variants: built-in thermowells for temperature sensors, oil pump to lubricate the bearings, sensors

Distinctive features

* Sizes from G65 to G6500
* Wide measurement range of costs from 8 to 10000 m3/h (under operating conditions) in pipelines from DN 50 to 500 mm
* Flanges: ISO PN10 ISO PN110, ANSI150 - ANSI600
Category catalog Prom.ua: gas Meters in Kiev