Industrial gas meters Arsenal type GMS
| Price: | negotiated |
| Company: | TPK TEHNOPROM |
| Seller: |  Sergej Aleksandrovich |
| Phones: |  +380 (96) 889-77-77 Show phone |
| Address: | Ukraine, Kyiv |
Gas meters rotary GMS are designed to measure the volume of natural gas and other agressivnyh gas density of at least 0.67 kg/cubic meters Counters GMS use in gas, gas processing and other industries and utilities for commercial and technological gas accounting.
The principle of action
The principle of operation of the counter is based on the rotation of two womanhorny rotor under the action of pressure difference at the input and output parts of the measuring chamber. At a constant gas flow, the rotor rotates with a constant circular speed, using for each turnover measured volume limited by the walls of the chamber and rotors.
Specifications
DN,
mm Size Qmax,
cubic meters/h Range Qmin,
cubic m/h Qstart,
cubic m/h Pulses per 1 cub. m Max. working pressure, MPa pressure Loss, PA, not more than
32 G 10 16 1: 65 0.25 0.05
10
0.6
200
G 16 25 1: 100 0.25 0.06 200
G 25 40 1: 100 0.40 0.08 200
40 G 16 25 1: 100 0.25 0.06
1.0
200
G 25 40 1: 100 0.40 0.08 200
G 40 65 1: 100 0.41 0.10 200
G 65 100 1: 160 1.00 0.12 200
50 G 65 100 1: 100 1.00 0.20 200
80 G 65 100 1: 100 1.00 0.20
1
200
G 100 160 1: 100 1.60 0.30 250
G 160 250 1: 160 1.60 0.30 300
G 250 400 1: 100 4.00 0.30 400
Typical calibration curve
Limits of basic relative error counter during manufacture and after repair do not exceed:
- + 2% in the range of expenses Qmin Q Qt;
- + 1% in the range of expenses Qt ≤ Q ≤ Qmax,
where Qt is the transition rate, which is equal to 0.05 Qmax.
Category catalog Prom.ua: gas Meters in Kiev
