The heat sinks Korado the steel

The heat sinks Korado the steel
Company Korado became one of the largest European manufacturers of heating appliances. Thanks to its own innovations the company Korado is one of the leaders in the industry and currently sets new trends in the heating technique.
Heat sinks Korado combine modern design, high quality surface finish, compact high heat transfer, high strength material of the heat sink, convenience and easy installation with concealed connections of pipes.
Heat sinks Korado produce single, double or three-pane design. To improve the thermal capacity of some types of heating heat sinks Korado to the internal (primary) side of the heating panel is welded to the additional surface of the P - shaped fins. Heating panel heating radiator Korado made of two stamped sheet with horizontal and vertical channels, welded along the perimeter of the roller seam and joints stamped elements - point welding method of resistance. Cold-rolled steel sheet with a thickness of 1.25 mm Additional surface is stamped from steel sheet of thickness 0.5 mm and welded spot welded to the vertical channels panel. This arrangement facilitates the natural flow of air along the heating surface of the heating radiator Korado. Each radiator Korado tested 1.3 MPa. The product of heating a steel panel heat sinks Korado designed for installation in closed heating systems Central heating buildings with a working pressure up to 1.0 MPa, in which the heat of the liquid is water or water solutions, the maximum operating temperature up to 110°C. a Small content of water in the sinks Korado allows the heating system to respond flexibly to the need for heat in the environment and enables efficient thermoregulation.
Description:
The model RADIK VK is a panel radiator with integrated connecting wiring and regulator valve. This solution allows the lower-right connection in increments of 50mm and apply radiator in heating systems with forced circulation. On the back is welded to the top two and bottom two brackets. Radiators length of 1800 mm and more, have six welded brackets.
Connecting thread......6 *G1\2 (Internal)
Attach radiator bottom right...
The step of joining............................... h = 50mm
Maximum working pressure...............1,0 MPa
Maximum test pressure......1.3 MPa
Maximum operating temperature.............110° With
Heat sinks Korado are three levels of surface treatment:
- degreasing and phosphating
- coated cataphoretic lacquer
- epoxy-polyester lacquer in the form of a powder with a color tint white RAL 9010
Certified in Ukraine
Warranty: 10 years