The semi-autogenous grinding mill/ grinding

Advantages equipment 1 Above 85% energy saving 2 Zero dust pollution, improve the environment 3 Minimal footprint 4 High performance Hardware features This mill employs a unique design, materials and water is continuously loaded from the Central sleeve on one side of the drum, the discharge is a special device on the end side, which avoids verismilitude and increase the productivity of the mill. The discharge hopper bottom discharge passage. Device for collecting VAT residue is fixed on the side surface of the discharge hopper. The finished products produt in the discharge hopper by gravity full refund of the ore pulp ago, protects the environment. Innovative technology unloading ore saves energy, saves costs of production of each ton of 70% of the installed power will save 60%. Will save the cost of building and accessory equipment, a minimal footprint. Using our izmennitsu, if the feed size 160mm, the particle size of the finished product 200 mesh, occupying 45%;+es～2mm occupying 45%；-2mm ～6mm occupying 8%； +6mm～10mm occupying 2%。Performance component ball mill reaches 2500t/d. Application This equipment is intended for rough grinding after primary crushing. Principle of operation A drum with a large diameter and small length is the most important part of the mill.Materials from the loading window will enter the drum through the Central hub.During rotation of the housing of the drum occurs centrifugal force, resulting in ore rise to a certain height,then fall, hit and crush each other. The finished products are discharged through residus the other side of the drum . Welcome to our website: http://www.ytxinhai.com/ru/ or http://www.xinhaimining.net/ Contact person: Mila Duan Mob: +86-18210539147 E-mail: info@ytxinhai.com Skype: xinhaiduan ICQ: 619-151-233