Spiral classifier with non-Intrusive spiral

Advantages equipment 1. Vysokoeffektivnoi and energy saving 2. Durable and long lasting 3. With rubber lining Xinhai Hardware features 1. Added automatic sand grassflat 2. Power saving at 1-1.5 G. per ton of subsoil 3. Avoid frequent inspection 4. Disproportionate impact large and small impellers reduced Application The spiral classifier with non-Intrusive spiral is used for calibration and preliminary classification during grinding; separation material in granular part and sludge in the processing of ores gravity and flotation processes or cyanidation; to highlight the dumping of sludge from the drain of the washing apparatus of pripremice placer ore; for the operation of dehydration. Principle of operation The classification process in such devices is carried out in a moving stream of water. The spiral classifier is a semi-cylindrical body in which a longitudinal shaft rotates the spiral. The pulp is fed into the precipitation compartment classifier located in its bottom part. Small particles of the product in the form of discharge are discharged through the lower end of the housing of the classifier. Larger material deposited on the bottom of the housing, is picked up by the coil and discharged in the upper part of the classifier has a drain threshold, the height of which change depending on the desired size of particles in the discharge. Adjusting the height of the overflow porota sets the size of the grains allocated to the overflow. Welcome to our website: http://www.ytxinhai.com/ru/ or http://www.xinhaimining.net/ Contact person: Mila Duan Mob: +86-18210539147 E-mail: info@ytxinhai.com Skype: xinhaiduan ICQ: 619-151-233