Food-grade silicone(silicone mold)

WELL-E Food-grade silicone(silicone mold)condicionado cure for the manufacture of ice,cupcakes,sweets(the food industry) and so on. Model color Curing agent (%) working Time with a mixture of at 25ºC (min) curing Time ( h) Hardness( shore A ) tear strength (kgf/cm2 ) tensile Strength (KN/m) Viscosity （cps limited) Linear shrinkage (%) Elongation at break （%） E610# translucent 1 : 1 20-50 2-6 10±2 ≥50 ≥23 6000±2000 ≤0.1% ≥500% E620# translucent 1 : 1 20-50 2-6 20±2 ≥60 ≥25 5000±3000 ≤0.1% ≥650% E625# translucent 1 : 1 20-50 2-6 25±2 ≥40 ≥11 6000±3000 ≤0.1% ≥350% E630# translucent 1 : 1 20-50 2-6 30±2 ≥50 ≥13 8000±3000 ≤0.1% ≥410% E642# translucent 1 : 1 20-50 2-6 42±2 ≥60 ≥15 10000±5000 ≤0.1% ≥400% E655# translucent 1 : 1 20-100 2-12 55±2 ≥60 ≥7 10000±2000 ≤0.1% ≥200% E660# translucent 1 : 1 20-100 2-12 60±2 ≥65 ≥7 10000±2000 ≤0.1% ≥180% E665# translucent 1:1 20-100 2-12 65±2 ≥70 ≥7 10000±2000 ≤0.1% ≥180% Operation instructions WELL-E with Food-grade silicone(silicone mold)condicionado cure(platinum catalyst): 1. Please clean up completely before surgery to prevent cure inhibition. 2. Weigh the two parts correctly,electronic weight in two separate container. 3. Mixing two Casta:1 and mix part a and part b evenly within 2-3 minutes. 4. And to get the mixture to a vacuum pump for de-air bubbles within 2-3 is the minutes(If no vacuum machines,please pour the mixture slowly and carefully down the side of the form frame so that less purecov caused.) 5. servcice product(the original model) with four plastic or wooden plates. 6. Clear your products and cleaned the separation layer composition(detergent or soapy water) on your product. 7. Pour the mixture into the vacuum staffing model from the shape of the frame. Website: http://www.sellsilicone.ru/ E-mail: hyy@szrl.net Contact:Lisa phone:+0086(755)85224692 M. t:+8618938867526 Skype:yanfang1989400 QQ: 18938867526 ICQ:609237017