Sell wind indicator Raymarine ST40

Indicator ST40 wind display accurate data on the strength and direction of the wind in analogue display segment 36 dial diagonal 88 mm Device has the ability to commit angle to the wind or manually automatically displays deviations and necessary course to return to set the angle to the wind. Display ST40 can also be used as repeater data on a remote control station in case of connecting it through the data network SeaTalk. The kit supplies consists of a display, the display cover, a network cable, SeaTalk, installation kit, and instructions.

Power:

Rated voltage (VDC) 12 V
Operating range voltage (VDC) - 10-16
Power consumption - 25 mA

Technical parameters:

Dimensions - (W x h x D), HH
Type of installation - bracket/surface
Keyboard - 3 button with backlight
The type and size of the display - 88 mm segment LCD
The maximum symbol size - 17mm
Display backlight - 3 levels and without backlight

Interfaces:

NMEA input/output (0183) - through the block E85001
SeaTalk - there

Display:

Indication of the voltage drop there
Configure the update time information on the display is
The system is equipped with sensors - features
Measuring wind speed - relative/true
The measurement interval wind speed (knots) - 0 - 60 knots
The wind direction relative/true
The outside measurements of the wind direction is 180° right/left side
Alarm wind - over/under true value
The units of wind speed (wind) - knots, m/s
The outside measurements of water temperature - -10°C to +40°C
The operating temperature range is -10°C to +70°C
The storage temperature range is -10°C to +70°C
Humidity - up to 95%
The standard of waterproofing is CFR46