Pneumatic planter HRC-8 HRC-6 (SPP-8,SPP-6)

Benefits drills type SPP: 1. When connecting the PTO, the exhauster is in motion, thereby creating a vacuum pressure, which through hoses low pressure creates a vacuum seed meter vacuum. Thanks to the vacuum, the seeds that are in the feed chamber, are attracted to the holes of the seed disks. If the machine moves the disks are driven. Rotating, they move seeds to the device entering them into the soil. Seeds covered by the disk pass by adjustable stripper which removes excess grains, leaving only one or two beans in each hole of the seed disk. 2. Simultaneously with the introduction into the soil of the seed, there is the possibility of mineral fertilizers by means of a device that allows you to adjust the rate of the fertilizer, depending on quantity required per hectare and type of fertilizer. 3. In order to increase the reliability of the transmission device for depositing fertilizer and seed into the soil, were installed reinforced drive sprocket and chain. 4. To improve performance and exceptions handmade in the process of planting, markers were equipped with a hydraulic system that gave the opportunity to manage tokens from the tractor cab.designed for precision planting row crops dashed method according to one or two beans in a nest at a given distance between nests. Thanks to a wide range of planter seed disks can carry out sowing of maize, sunflower, peas and other crops with similar shapes and sizes of seeds, with wide row spacing 45-70cm. Planter type SPP/FS is equipped with a device for simultaneous, with seeding, soil and mineral granular fertilizers. Benefits drills type SPP: