Lathe metal Zenitech WM500 (1500)

Massive bed is made of cast iron

Hardened induction furnace and ground guides the bed

Spindle stock with magnetic clutch

The mechanism of the soft start protects the engine and increases the service life of the drive

The mechanism of the spindle drive is constantly working in oil bath

The range of rotation of the spindle 36 to 1600 rpm

Removable bridge frame

Transmission allows you to cut the thread without replacement gears

Convenient control of longitudinal and transverse flow when using cross joystick with button quick movement

Jog mode spindle

Hardened and ground gears in the front and grandmother in the gearbox

Adjusting the gaps guide using V bars

Centralized lubrication longitudinal caliper

Adjustable in the transverse direction of the tailstock for turning cones

The five-way control shaft with Cams

Technical features: WM500 (1000)

• The distance between centers 1500 mm
• The turning diameter over bed 500 mm
• The turning diameter over cross slide mm 310
• Diameter turning over the notch in the frame 720 mm
• The width of the frame 405 mm
• Diameter of spindle bore 80 mm
• Spindle taper MT7
• Number of spindle speeds 12
• The spindle speed rpm 36-1600
• Cross feed range mm/Rev 0.027-1.07
• Longitudinal feed range mm/Rev 0.063-2.52
• The range of cut inch threads 28-2 T. P. I./26 species
• Range cut metric threads 1-14mm /22 views
• Pitjeva thread 56-4 D. P./24 views
• Module thread 0.5-7 M. P./18 species
• The accelerated movement of the transverse carriage m/min 1.9
• The accelerated movement of the longitudinal slide m/min 4.5
• Move the upper caliper mm 145
• Cross slide travel mm 340
• Max. the size of the cutter 25x25 mm
• Stroke of tailstock quill mm 150
• The diameter of tailstock quill mm 75
• The quill tailstock MT5
  
• Motor power kW 7.5
• Overall dimensions (LxWxH) mm 3000x1100x1650
• Net weight kg 3000

On all machines uRostranitsa warranty 1 year, provide warranty services and post-warranty service.