ECV, borehole submersible pump
Offer type: salePublished: 27.02.2015
| Company: | OOO 'Kompani Plazma' |
| Seller: |  Andrej |
| Phones: |  +380500276693 Show phone |
| Address: | Ukraine, Kharkivs'ka Oblast', Kharkiv |
Borehole vertical centrifugal single, multistage submersible pumps/units
Taking water from artesian wells total mineralization (dry residue) not more than mg/l with the hydrogen index of 6.5 to 9.5 pH temperature of 25°C mass fraction of solid mechanical impurities not more than 0.01% chloride not more than mg/l, sulfate - 500 mg/l hydrogen sulfide 1.5 mg/L.
Field of use - urban, agricultural and industrial water systems.
The pumps have a various design - 4 modifications:
- impeller fixed on the shaft. Axial hydraulic force is perceived by the supporting device located in the motor. Clip blade taps pressed;
- clip blade taps of cylindrical pipes with disks, which fix the taps in the axial direction, is divided between a stepped cavity and form a slotted sealing impellers;
- cast (Gorshkov) scapula retraction. Speed mixed-flow pump type. The impeller is fixed on the shaft;
- the impeller is located on the shaft of the motor (monoblock units).
In the implementation of industrial pumps a wide range of applications
Taking water from artesian wells total mineralization (dry residue) not more than mg/l with the hydrogen index of 6.5 to 9.5 pH temperature of 25°C mass fraction of solid mechanical impurities not more than 0.01% chloride not more than mg/l, sulfate - 500 mg/l hydrogen sulfide 1.5 mg/L.
Field of use - urban, agricultural and industrial water systems.
The pumps have a various design - 4 modifications:
- impeller fixed on the shaft. Axial hydraulic force is perceived by the supporting device located in the motor. Clip blade taps pressed;
- clip blade taps of cylindrical pipes with disks, which fix the taps in the axial direction, is divided between a stepped cavity and form a slotted sealing impellers;
- cast (Gorshkov) scapula retraction. Speed mixed-flow pump type. The impeller is fixed on the shaft;
- the impeller is located on the shaft of the motor (monoblock units).
In the implementation of industrial pumps a wide range of applications
