Cabinets Preliminary Proofing MFN-238
Offer type: salePublished: 02.09.2013
| Seller: |  TOKUR Ali |
| Phones: |  +7 (495) 772-50-71 Show phone |
| Address: | Russian Federation, Moskovskaya Oblast', Moscow |
Wardrobe preliminary proofing is designed to relieve tension in the test workpiece after rounding that can significantly improve the appearance and quality of the products and saves time and space. Built in automatic line between the dough-rounder and batono any bahatoformatne machine.
Pre-proofing is applied when cutting the dough from high-quality wheat flour and is subject to rounding. In the fission process of the test and subsequent rounding dough pieces gluten network test frame partially broken, so before subsequent mechanical impact forming machine it is necessary to restore the damaged structure of the test, using the pre-boards. The use of pre-proofing significantly increases the volume and porosity of bakery and pastry products. This operation is carried out within 5-8 minutes and does not require specific parameters of the air. In some cases it is carried out directly in the shop during displacement of the test workpiece transporting device. The surface of the lumps of dough are several dries, which further reduces the adhesion test to the working bodies of the forming machine.
Cabinets preliminary proofing series MFN - specially designed equipment for cold and hot climates. Time predestine depends on the type of product and temperature: in cold temperature takes 8.5 minutes at a warm temperature for 4.5 minutes.
Working principle:
Using the reel for feeding dough dough from acropetally machine enters the machine for aging. Then, alternately moved from one container to another (this process at cold temperature takes 8.5 minutes at a warm temperature for 4.5 minutes). Next, the dough is fed to a Department acquires the desired shape. The transmission mechanism of the test is adjustable, making it possible to output the test, as with the right hand and on the left, and simplifies the manufacturing process.
Brief description:
•Number of nets inside the equipment from 154-280, endurance test in an hour from 1800 to 2000 pieces
•Removable and mobile mesh cups plastic
•Stainless steel case
•Glass door allows you to observe the process of aging test
•Number of nets inside the equipment from 154/280, extract the hour from 1800 to 2000 pieces blanks
•Work silently and without vibration, low energy consumption, easy cleaning and machining of parts
•Has a certificate of conformity and Sanitary-Epidemiological conclusion of the Russian Federation.
•The warranty period is 2 years.
Pre-proofing is applied when cutting the dough from high-quality wheat flour and is subject to rounding. In the fission process of the test and subsequent rounding dough pieces gluten network test frame partially broken, so before subsequent mechanical impact forming machine it is necessary to restore the damaged structure of the test, using the pre-boards. The use of pre-proofing significantly increases the volume and porosity of bakery and pastry products. This operation is carried out within 5-8 minutes and does not require specific parameters of the air. In some cases it is carried out directly in the shop during displacement of the test workpiece transporting device. The surface of the lumps of dough are several dries, which further reduces the adhesion test to the working bodies of the forming machine.
Cabinets preliminary proofing series MFN - specially designed equipment for cold and hot climates. Time predestine depends on the type of product and temperature: in cold temperature takes 8.5 minutes at a warm temperature for 4.5 minutes.
Working principle:
Using the reel for feeding dough dough from acropetally machine enters the machine for aging. Then, alternately moved from one container to another (this process at cold temperature takes 8.5 minutes at a warm temperature for 4.5 minutes). Next, the dough is fed to a Department acquires the desired shape. The transmission mechanism of the test is adjustable, making it possible to output the test, as with the right hand and on the left, and simplifies the manufacturing process.
Brief description:
•Number of nets inside the equipment from 154-280, endurance test in an hour from 1800 to 2000 pieces
•Removable and mobile mesh cups plastic
•Stainless steel case
•Glass door allows you to observe the process of aging test
•Number of nets inside the equipment from 154/280, extract the hour from 1800 to 2000 pieces blanks
•Work silently and without vibration, low energy consumption, easy cleaning and machining of parts
•Has a certificate of conformity and Sanitary-Epidemiological conclusion of the Russian Federation.
•The warranty period is 2 years.
