multi-position welding equipment

Machine for the production of masonry grid or mesh used in construction This fully automatic machine is using technology electrical synchronous control. And this machine specializes in the production of nets,which are used in construction, but can only work grid maps may not in rolls. The welding process and the welding time is controlled by a programmable logic controller. The input panel are touch screen or keyboard, which can make the programming of the machine is more logical and more intelligent. And this device has some characteristics such as hard to compress, multiple and continuous welding. And this machine has a boot groove that runs from the assistance of the electric motor. And the transverse wire is fed from universal devices. Longitudinal wire, supplied by the brake motor, and the device pulls the mesh using a stepper motor. The machine has a system of stretching of the grid, which controls the openings of the wire loops and more thoroughly to carry out the welding operation. The advantage of this machine: you can exist in different cells between the longitudinal wires. We have a device for cutting transverse and longitudinal wire (the device is protected by national patent ZL02208722,2). The main parameters Wire diameter : 4,0-8,0 mm cell Size : 100*100-300*300mm Width of mesh : 1200mm 1600 Number of electrodes St or 16pcs rated voltage : 380V/50HZ (can be changed) rated power : 125 x 4 kW welding Speed : 70-80 series /min dimensions : 6.7*2.0*1.8 m Proposal: masonry welded Mesh is widely used in construction as a reinforcing element in the construction of reinforced concrete and brick buildings. In addition, the metal mesh masonry is used in road and finishing works, pouring slabs, foundations, as well as in the production of Cells in poultry and fur farming