The ultrasonic flaw detector UCB UD-2301
Company: | Novotest |
Seller: | Lazarenko Dmitrij Sergeevich |
Phones: | (056) 767-05-09 Show phone |
Address: | Ukraine, Dnipropetrovska Oblast', Novomoskovsk |
Ultrasonic detector UD-2301 designed to detect defects such violation the continuity and homogeneity of the materials semi-finished products, finished products and welded joints, to measure the depth and coordinates of their occurrence, measurement thickness measurements of the propagation velocity and attenuation of ultrasonic fluctuations (DCU) in the material. The ultrasonic flaw detector is lightweight, comfortable and functional. Suitable for control of products from ferrous and non-ferrous metals and their alloys (steel, bronze, copper, aluminum and so on)
Ultrasonic detector UD-2301 with a color display, and the minimum size is the best choice for expert ultrasonic inspection. Powerful, lightweight and portable flaw detector, ergonomic, impact-resistant metal casing. Flaw detector UD-2 allows you to measure the thickness of the products with the greatest accuracy output signal in form A - and B-scans and has all the features for full documentation control. Ultrasonic flaw UCB UD-2301 meets all requirements of the modern digital flaw detector, with the cost lower than all existing analogues!
Flaw detector ultrasound is produced with a standard batteries type AA (flaw detector works up to 10 hours). Unique low power detector allow control over an 8-hour shift without recharging flaw detector. Is the functional analog of the detector UCB UD-1, but has a compact case, small size and weight, and easy to control in complex production conditions.
Flaw detector allows to solve a wide range of tasks - from the thickness measurement of thin products, to radiography of large castings. Get advice on choosing flaw detector for monitoring your products you can our experts. We provide training flaw detector, developed methods of control your products using an ultrasonic flaw detector.
The purpose
· inspection of welded joints and base metal
· search areas of corrosion, cracks, internal laminations and other defects
· determination of coordinates and parameter estimation of defects such violations the continuity and homogeneity of the material in products from metals and plastics
· thickness measurement products
Advantages of ultrasonic flaw detector UD-2301
· Frequency range continuously adjustable from 0.2 to 10 MHz
· Two independently controlled gates (A and B) and for each custom gate alarm
· The determination of the signal level and the coordinates of the defects
· Automatic or manual building of the TCG curve (up 16 points)
· The presence of the flaw detector mode control using DGS
· Two types of signal representation: detectivey and radio
· Build and handling in detector A, B sweeps.
· Modes: envelope, frost and ray path display for convenience the defectoscopy
· In detector implemented a unique system of displaying information, increase the usability of the instrument, and performance monitoring
· The detector has a colour, contrast TFT display
Technical characteristics of ultrasonic flaw detector UCB UD-2301
The measured depth range (steel), mm
up to 6000
The gain range of
125 dB, in 0.1 dB
Temporary adjustment gain (TCG)
range up to 70 dB, with the construction of the curve 16 reference points manually entered or from the reference reflectors
Zone control
two independent zones, the beginning and width vary throughout the range scan
The probe pulse
custom, with an amplitude of up to 350 V with variable length from 12.5 to 500 NS in increments of 12.5 NS
Memory
settings with a-scan (B-scan), the limited size SD card control protocols (signal envelope, the measurement result, the operating parameters of the device, date, time and name of the Protocol), limited the size of the SD card
Interface
SD-card
Working temperature, hail
-20...+50
Kit delivery of ultrasonic flaw detector UCB UD-2301
- ultrasonic flaw UCB UD-2301 (e-block)
- converters P-5-K6, P121-5-65
- cable connection Lemo-Lemo
- AA batteries - 3 piece, charger
- cable to connect to the computer
- passport, user manual, case
Additional options to order
· additional transducers for flaw detector
· additional cables to the flaw detector
· additional charger
· standard samples (CO-1, CO-2, CO-3, CO-3R and other)
· standard samples of the plant with reflectors type of cut, flat-bottomed drilling and other
· standard samples of the plant to configure depth gauge (step)
· contact liquid (gel) for ultrasonic control