Energy saving heating installation electrical installation warranty service

1. One kilowatt of power heats 60 cubic meters or (20 sq m with a ceiling height up to 3 m)

2. The duration of operation of the boiler in a hot water heating system from 1 to 8 hours a day depending on the ambient temperature (automatic operation with sensor-relay temperature), so when the heating area from 40 to 750 sq. m. electricity consumption per day is from 2 to 288 kW / h
(depending on modification, see table characteristics).

4. The boiler during operation in a hot water heating system provides the ascent of heated coolant to a height of from 3 to 24 meters (in depending on the modification), due to the large temperature difference at the inlet and the output of the electrical installation, allows to heat single-storey and multi-storey premises without the use of circulation pumps.

5. The boiler is suitable for different types of water heating systems.

6. The input and output of the boiler is mounted in the water heating system through sanitary couplings, plumbing adapter or plumbing hoses.

7. In the water heating system, which is already installed boiler (boilers), is mounted in parallel with this boiler (boilers).

8. In a hot water heating system with forced circulation the circulation pump is mounted in the return line of the system of water heating before installation.

9. All work on the electrical installation in the hot water heating system are the same as with conventional electric boilers, gas boilers, stoves, etc.

10. The exit temperature of the electrical installation: up to 95 ° C.

11. Working environment (coolant: water and antifreeze liquids for hot water heating systems.

12. Working voltage: 220 / 380V ± 10%.

13. Length (single phase option): 300 mm.

14. Connection sizes: inlet G1 ", G1 1/4 ".

15. Length (three-phase modification): 400 mm.

16. Connection sizes: inlet G1 1/4 " G1 1/4 ".
Call consult.