Semiautomatic vertical gear hobbing universal 53А20 sun.
Offer type: salePublished: 08.09.2016
| Price: | 55 000 UAH |
| Seller: |  Aleksandr |
| Phones: |  +380635596042 Show phone |
| Address: | Ukraine, Dnipropetrovska Oblast' |
The machine is connected, in a very good condition, complete, ready for inspection.
The largest diameter of the machined gear wheels, mm 255
Max. length of vertical moving of milling support, mm 250
The largest module of the treated gear wheels according to ST SEV 310-76, 4 mm
The greatest angle of inclination of the teeth, hail. 60
The diameter of the spindle flange of the workpiece, mm 200
The cone of the spindle, according to ST SEV 145-75 Morse 4 at 6
The largest diameter of the installed hobs, mm 125
The distance from the base of the machine to the upper end of the spindle of workpiece, mm 830
The least number of affected teeth 6
The maximum length of a cut spur wheels largest diameter, mm 220
Max. length of vertical moving of milling support, mm 250
Maximum axial shift of the cutter, mm 120
Limits of spindle rotation frequencies of the milling cutter, rpm 80-500
The range of values of vertical feed, mm/min 0,7 – 120
The range of values of the radial feed, mm/revolution of the product is 0.1 – 1.6
The distance between the axes of the table and the cutter, mm 25 – 200
The distance from the axis of the cutter to the end of the table, mm 165 – 415
The scale of tincture of center-to-center distance of 0.01 mm
The main motion motor 4А132М8/6/4 U3
Power, kW 2,8/2,6/4,5
Rotation frequency, rpm 750/1000/1500
Dimensions of the machine with a remote equipment, mm 2130x1556x2100
Weight of machine, kg (without external equipment) 4 300
The largest diameter of the machined gear wheels, mm 255
Max. length of vertical moving of milling support, mm 250
The largest module of the treated gear wheels according to ST SEV 310-76, 4 mm
The greatest angle of inclination of the teeth, hail. 60
The diameter of the spindle flange of the workpiece, mm 200
The cone of the spindle, according to ST SEV 145-75 Morse 4 at 6
The largest diameter of the installed hobs, mm 125
The distance from the base of the machine to the upper end of the spindle of workpiece, mm 830
The least number of affected teeth 6
The maximum length of a cut spur wheels largest diameter, mm 220
Max. length of vertical moving of milling support, mm 250
Maximum axial shift of the cutter, mm 120
Limits of spindle rotation frequencies of the milling cutter, rpm 80-500
The range of values of vertical feed, mm/min 0,7 – 120
The range of values of the radial feed, mm/revolution of the product is 0.1 – 1.6
The distance between the axes of the table and the cutter, mm 25 – 200
The distance from the axis of the cutter to the end of the table, mm 165 – 415
The scale of tincture of center-to-center distance of 0.01 mm
The main motion motor 4А132М8/6/4 U3
Power, kW 2,8/2,6/4,5
Rotation frequency, rpm 750/1000/1500
Dimensions of the machine with a remote equipment, mm 2130x1556x2100
Weight of machine, kg (without external equipment) 4 300
