Marmeladova machine IOM-2

MARMELADOVA MACHINE IOM-2

Marmeladova machine IOM-2 is a modern high-tech equipment for casting jelly mass of molding silicone mats. The principle of operation of the machine based on piston group of nozzles depositing gummy mass. The movement mechanism organized on the basis of the pneumatic system. The dosage is determined by the piston stroke. Control system basis of programmable controller allows you to configure the operating modes reducing the time and simplifying the transition to producing different types of products. Save in memory of the controller various programs for operating the machine. All the details design in contact with the product are made of stainless steel.

 

Technical specifications on marmeladovoy machine IOM-2

Specifications

IOM-2

Performance kg/HR

the estimated*

The number jigging nozzles.

from 8 to 12

Width jigging Mat, mm

from 350 to 600

Minimum cycle time jigging 1 row h

3,2

Maximum cycle time jigging 1 row h

20

Installed power, kW

0,5

Consumed power, kW

less than 0.5

Nominal voltage, V

220V / 50 Hz

Consumption compressed air, l/min

no more than 400

The volume the receiver on the compressor, l

at least 100

The volume hopper of the product, l

from 25 to 40

Overall dimension (l*W*h), m

2.45 x 1.1 x 1.65

Weight machine, kg

300

Warranty months.

12

* The performance of the machine in kg/HR for the feed is constant jigging mats can be calculated by the formula:

P = (3600:t)·n·m

Where t – time jigging, h

n – the number jigging nozzles.

m– the mass of one element, kg

Example of calculation of performance for minimum complete set of 8 nozzles with a weight the final product 15 g:

t = 3,2 h, n = 8 PCs, m = 0.015 kg

P = (3600:3,2)·8·0,0015 = 135 kg/hour

Example of calculation for maximum performance complete set of 12 nozzles with the weight of the final product 20 g:

t = 3,2 h, n = 12 PCs, m = 0,020 kg

P = (3600:3,2)·12·0,0020 = 270 kg/h

 

Advantages IOM-2:

· All the mechanisms work on the basis of the pneumatic system Camozzi (Italy), which increases the reliability and stability of equipment, in contrast to electric motors, gearboxes and drives constantly failing.

· The number of depositing nozzles can vary from 8 to 12 pieces, allowing to specify the required performance

· Separate fine adjustment of each nozzle, allowing to reach mini