Seminarska-de-hulling machine is a centrifugal SC-1,0; STS-2,0
Offer type: salePublished: 21.09.2016
| Price: | 19 500 UAH |
| Seller: |  Vladimir Krinitskij |
| Phones: |  050 135 49 84 Show phone 0512 50 88 01 Show phone |
| Address: | Ukraine, Mykolayivs'ka Oblast', Mykolayiv |
Seminarska-de-hulling machine is a centrifugal SC-1,0; STS-2,0
Designed for caving (Department) by the one-shot of sunflower kernel from its outer shell (husk).
Used in the production of vegetable oil and “Eastern sweets”: halva, kozinaki.
Specifications:
STS-1,0
STS-2,0
Productivity, kg/h
(sunflower)
up to 1000
to 2000
The degree of collapse, %
75-92
75-92
Installed power, kW
3,0
4,0
Dimensions
1350х680х1050
1500х720х1200
Weight, kg
185
210
The cost with the economy picking on 25.06.2015 in UAH.
19500
21300
* without a frequency Converter
The minimum extent of collapse correspond to the seeds of smaller factions, and the large degree of collapse - the larger factions.
If necessary, produce seminarski only for small fractions with a high degree of collapse.
The grain through the receiving device is supplied to the center of a rapidly rotating rotor in which it is in motion (under the action of centrifugal force) is guided on its longitudinal axis and acquires considerable speed.
Flew with the rotor it hits the reflective ring (Deco)
With a single blow each, the grains of their shell is split and the kernel is released.
Received - in contrast to the towpath of the Huller is no longer subjected to repeated impacts or friction so the output of crushed cores and shorts minimum.
The operation of centrifugal rushki based on the fact that the least effort of destruction of the shell of seeds required in their application along their greater axis - position “standing” and not in the provisions on “rib” or “flat”. This is because the air layer (gap) between the core and sheath along the length of the seed is greater than the thickness and width. And with the growth of gap participation of the nucleus in the perception of stress is reduced and the effort for the destruction of fruit shell (husk) of the seed is reduced.
Achene sunflower: 1 Fruit shell; 2-Seed shares; 3 Root; 4-Seed coat and the endosperm; 5-an Air cavity.
Best quality of collapse (the minimum number of whole grain, nemorosa, crushed kernel and shorts is achieved by:
-short (2-3min) the drying of grain, this leads to the fact that the fruit shell (husk) is fragile, and - still retains its elastic-plastic properties and will not be destroyed on the deck;
-individual selection of the force of impact of grain on the deck for each batch of seeds as it depends on the carnival (of sorts), humidity and their sizes (they are pre-calibrated)
On customer request can be equipped with otheiwise-sieve devices with partial or full screening of the husk and return the whole seeds and nemorosa to re-collapse.
Examples of obroski of sunflower seeds on seminarske STS-2:
1st Grade “Svitoch” weight 1000pcs. 37,8 gr.
faction: the gathering with sieve = dia. 4 mm; passage via sieve = dia. 5 mm.
the degree of collapse of 75%
2 the Sort of “Buttermilk” weight 1000pcs-of 84.3 gr.
faction: the gathering with sieve = dia. 5.5 mm; passage via sieve = dia. 6.5 mm.
the contents of rosanky:
the whole seeds+nidorous = 11,8%
whole kernel = 43,26 %
the husk, shorts etc. = 42,7%
total:100%
The degree of collapse of the = 100% USD 11.8%=88,2%
Presentperfect
http://psp-ua.blogspot.com/2013/11/10-20-1000-2000-0-21.html
