Machine glazing MG

Machine for glazing with roll-out bathtub MG intended for mechanization of the process of enrobing confectionery chocolate glaze in the food industry.

Job temperature control and maintenance is ensured by an electronic regulator of the temperature. For gradually change the amount of glaze that is applied to glazing, to control the speed of the net the conveyor uses a variable frequency drive "Mitsubishi". The machine is equipped with a heated glazing the transition between the cooling conveyer and mesh belt, eliminating icing and loss of glaze.

WORKING PRINCIPLE:

To roll-out the capacity load of chocolate the icing and, if necessary, desired additives. In the tank is warming up semi-finished chocolate glaze to a predetermined temperature. Upon reaching a predetermined temperature, the chocolate glaze served with a pump in glazing the tub. As fill baths icing, open the damper and adjust the gap so to squirt the frosting was smooth and flowed without breaks. Small conveyor stack glaziruetsya products and include conveyor. Products come on a large conveyor in the area of glazing. Passing through the conveyor, the products are delivered in the area blowing to remove the excess glaze from the top. Adjusting the frequency of rotation fan you can change the amount of glaze remaining on the surface of products. After blowing products undergo two smoothing the shaft to remove the excess glaze from the bottom and simultaneous smoothing of the bottom of the products. The conveyor is installed for heated shaft-kapreshumi with adjustable actuator, rotating in the direction opposite of motion conveyor and for removal of drops of icing on the bottom end the surface of the product. Then the products comes to cooling.

Technical features

MG-1

MG-2

MG-3

Installed power, kW, not more

6,5

7

10

Performance (area covered by a layer of 1.5-2.2 mm), m2/min.

The estimated

Belt width of mesh, mm

420

600

820

The speed of the belt, m/min

0,4 - 5

Overall dimensions (LxWxH) mm

1220х1120х1550

1300х1400х1550

2000х1800х1900

The volume loading capacity, l

70

90

100

Weight, kg, not more

300

400

500